Owner`s manual

Installation Instructions
11
The dishwasher must be secured to the countertop.
• Position the dishwasher so that the tub flange aligns
with the front face of the cabinet frame.
IMPORTANT: Check to be sure the dishwasher is
centered in the opening and there is no interference
with adjacent cabinets when opening or closing
the door.
Figure
21
STEP 11 SECURE DISHW ASHER
TO CABINET
Figure 20
IMPORTANT – Drive screws
straight and flush. Protruding screw heads will
scratch the top of the control panel and can interfere
with door closing.
STEP 12 CONNECT W ATER SUPPLY
• Slide compression nut, then ferrule over end of
water line.
• Insert water line Into 90 90 ° elbow .
• Slide ferrule against elbow and secure with compres-
sion nut.
Ferrule
90 Elbow
Compression Nut
Hot Water
Supply Line
IMPORT ANT – Check to be sure
that door spring does not rub or contact the fill hose or
water supply line. Test by opening and closing the door.
Re-route the lines if a rubbing noise or interference
occurs.
• Fasten the dishwasher to the underside of the
countertop with the 2 Phillips screws provided.
Align Tub
Flange
to Front
Face of
Cabinet
Frame
Connect water supply line to 90
elb
ow.
90 Elbow