Use and Care Manual

8
Every now and then check if the appliance is sufficiently
ventilated (adequate air circulation behind the
appliance).
For household refrigerating appliances, in normal
temperature conditions, please arrange the thermostat
at the middle setting.
Before loading the appliance with packages of fresh
foods, make sure they are cooled to ambient
temperature.
Ice and frost layer increase energy consumption, so do
clean the appliance as soon as the layer is 3-5 mm thick.
If it is the outer condenser, the rear wall should be
always
clean free of dust or any impurities.
Always consider instructions stated in sections
Positioning and Energy Saving Tips, otherwise the energy
consumption is substantially higher.