Counter Top, 6 Place Setting, Dishwasher USER MANUAL Dishwasher Model: CD 400-3203 W Quality n Innovation n Style
English important safety instructions READ ALL INSTRUCTIONS BEFORE USE. WARNING - To reduce the risk of fire, electric shock, or injury to persons when using your appliance, follow the basic precautions, including the following: 1. Read all of the instructions before using this appliance. 2. Use the dishwasher only for its intended function. 3 The manufacturer cannot be responsible for problems caused by ignoring these safety and caution instructions. 4.
English 24. H ydrogen gas may be produced if the water heater has not been used in more then 2 weeks. This could be explosive and can explode under certain circumstances. If this is the case, before using this appliance turn on all the hot faucets and let the hot water run for a few minutes. This will let the trapped hydrogen escape. During this process do not turn on an electric appliance, smoke, light a match/lighter or use a flame to avoid an accident, as hydrogen gas is flammable and can explode. 25.
English Safety requirements Electrical Requirements Grounding Instructions This appliance must be plugged into at least a 15 AMP 120 Volt 60 Hz Grounded Outlet. This appliance must be grounded. It is equipped with a 3-Wire cord having a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded. Warning! I mproper use of the grounded wire can result in the risk of electric shock. Consult a qualified electrician if necessary.
English table of contents IMPORTANT SAFETY INSTRUCTIONS............................................. 1 SAFETY REQUIREMENTS / ELECTRICAL REQUIREMENTS............... 3 Specifications..................................................................................... 4 PARTS AND FEATURES.................................................................5-6 INSTALLATION INSTRUCTIONS...................................................... 7 Proper Location...........................................................
English PARTS AND FEATURES Front View 3 1 2 Control Panel A B C D I E F G 5 H A. 3 In 1 Function F. Child Lock Function B. Heavy G. Rinse C. Normal H. Rapid D. Eco I. Pre-Wash E. Rinse Aid 10 9 8 6 11 1. Door Handle 7. Power Button (ON / OFF) 2. Outer Door 8. Start/Pause Button 3. Control Panel 9. Delay Button (0-24 Hours) 4. Power Indicator Light 10. 3 in 1 Button 5. Program Indicator LED Display 11. Child Lock Function 4 7 6.
English PARTS AND FEATURES Inside View Back View 1 2 11 3 4 5 6 7 8 10 9 Quick Faucet Adapter 12 13 1. 2. 3. 4. 5. 6. 7. 8. 9. CupShelf Detergent Dispenser Cutlery Basket Filter System Rinse Aid Dispenser Spray Arm Rack Drain Pipe Connector Inlet Pipe Connector 10. Power Cord 11. Quick Faucet Adapter 12. Quick connect fitting; Fits standard 7/8" diameter faucets 13. Red Pressure release button BEFORE USING yOUR DISHWASHER • Remove the exterior and interior packing.
English INSTALLATION INSTRUCTIONS Proper location 1. First determine the best location for your new Countertop Dishwasher. It must be close to a 120 Volt (15 Amp) outlet and a sink with a water supply and drain. 2. The minimum height clearance required to install your dishwasher on a countertop surface with overhead cupboards/ Kitchen cabinets is 17.8” (45cm). This Space Saving Countertop Dishwasher is 17.2" in height. Height between tabletop to Cabinet 17.8" Dishwasher Height 17.
English Quick Faucet adapter connection The Quick Faucet Adapter easily connects to the sink faucet A. F irst remove aerator from your faucet nozzle and attach the quick connect threaded adapter to the faucet. The quick connect faucet adapter allows easy snap-on/snap-off connection to standard (7/8” diameter) faucets. Faucet Water Connection B. C onnect the dishwasher Quick Connect Faucet Adapter to the faucet first to ensure the hose length fits the dishwasher’s selected location.
English G. W ith all the fittings connected, open the tap to test to make sure there are no leaks. Connect the A/C power cord and use the dishwasher as outlined in the manual. H. W hen finished using the dishwasher, you need to close the water supply to the tap and disconnect the power supply cord.. WARNING: The water intake hose is now pressurized.
English Drain hose: This unit has a special grey drain hose included. If you choose a permanent installation you must connect this hose to the dishwasher drain threaded connector. Use one hose clamp supplied.
English Recommendations for use Water, Pressure and Temperature For best operating results, incoming water should be HOT and the pressure should be between 0.03~1Mpa. Incoming water supply for the dishwasher is controlled by a ‘low water switch’ application, so if household water ceases, dishwasher will stop. We recommend for maximum efficiency and optimum results use HOT WATER ONLY.
English Tips to avoid stains and films: The following suggestions are recommended to prevent stains and films from dishware and utensils items: • You must rinse all dishware, silverware, glassware and food containers right a way after use. Some citric based food products, coffee, tea and iron deposits in water can cause yellow or brown film on inside surfaces when left on for a long time and not rinsed immediately. • Rinse off acid based liquid, such as vinegar or lemon juice right away.
English Note: T he standard plate is 10" inches. For ease of lading/unloading large size dinner plates from the dish rack, it maybe necessary to (temporarily) remove the cutlery basket. When loading/unloading is complete, return the cutlery basket to its original position. How to load items: • L ocate sharp items so that they are not likely to damage the door seal. • Do not load plastic items unless they are marked “dishwasher safe” or the equivalent.
English Proper Use of Detergent NOTE: U se ONLY detergent specifically made for automatic dishwashers. Check product packaging to be certain. Keep your detergent fresh and dry. Do not put powder detergent into the dispenser until you’re ready to wash dishes. The amount of detergent to use depends on whether your water is hard or soft. With hard water, you need extra detergent. With soft water, you need less detergent. Your water company should be able to tell you how hard your water is.
English Rinse Aid Setting The amount of rinse agent released into the final wash can be adjusted. The factory setting is at the midpoint. If there are rings of calcium (hard water) spots on dishes, try a higher setting. To Adjust the Rinse Aid Setting Remove the dispenser knob; then turn the adjuster counterclockwise to increase the amount of rinse agent. Low Rinse Aid Level Indicator When the rinse aid level becomes low in the dispenser, the "Rinse Aid" icon in the display will light.
English Cycle Sequence NOTE: C ycle times listed are for reference only as they can change based on conditions such as inlet water temperature, whether dishwasher is partially or fully loaded, and the heating element power rating. Cycle Water (Approx) Time (Approx) Sequence Pre-wash Pre-wash (122ºF/50ºC) Heavy 3.83 Gallons 100 Minutes Wash (131ºF/55ºC) Wash (122ºF/50ºC) Rinse Rinse (149ºF/65ºC) Dry Pre-wash Pre-wash Normal 3.
English Operating Instructions Operating Your Dishwasher 1. E nsure that all electrical, water, and drain connections have been installed correctly before proceeding. 2. Load the dishwasher (See the “Loading your Dishwasher” section). 3. Make sure that the water supply is turned on to full pressure. 4. A dd the appropriate amount of dishwasher detergent to the dispenser (see Proper Use of Detergent Section). 5. Close the door and ensure that the door latch has engaged. 6.
English Changing the Wash Program / Cycle: If at any time during the washing process you would like to change the selected wash program /cycle; 1. Press and hold the START / RESET button for approximately 3 seconds. (The START / RESET indicator light will be ON indicating that the unit is in PAUSE mode.) 2. Select the desired wash program / cycle by pressing the program button. 3. Press the START / RESET button again, the dishwasher will resume operation using the newly selected wash program / cycle.
English Using The Delay Feature The start of the HDC2406 can be delayed between 1 and 24 hours in one hour increments. To utilize this feature: 1. Press “ON/OFF” button to “on” position 2. Press “PROGRAM” button 3. Press “DELAY” button once for each hour of delay (i.e. press 3 times to delay start 3 hours) To cancel the delay feature: 1. Press “ON/OFF” button to “off” position.
English Remarks: - Inspect the filters for blocking every time the dishwasher has been used. - By unscrewing the coarse filter you can remove the filter system. Remove any food remnants and clean the filters under running water. WARNING: ·Never run the dishwasher without the filters in place.The dishwasher must never be used without the filters.Improper replacement of the filter may reduce the performance level of the appliance and damage dishes and utensils.
English Troubleshooting Problem Possible Causes Possible Solution: Dishwasher does not start Fuse is blown or the circuit breaker has tripped. Replace the fuse or reset the circuit breaker. Remove any other appliances sharing the same circuit with the dishwasher. Power supply is not turned on. •M ake sure the dishwasher is turned on and the door is closed securely. • Make sure the power cord is properly plugged into the wall socket. Dishwasher door is not closed properly.
English Problem Possible Causes Possible Solution: The dishes are not clean. The dishes were not loaded correctly See “Loading the Dishwasher Rack” section of this manual. The program selected was not the appropriate cycle for the condition of the dishes. Select a more intense program. Not enough detergent was dispensed. Use more detergent, or change the type of detergent being used. Items were blocking the rotation path of the water spray arm.
