Use and Care Manual

Time Display - Shows Program times and time remaining (minutes)
Light Bar - Shows colors for different programs
Step 1 - Power Button
Step 2 - Program Button
This button is used to select a drying program. When you press the Program button, it first
shows red on the light bar. Each time you press it, will show a different color for each of the
4 different programs.
inactive
drying program.
This button is used to set the drying time. With each press of the button, the time increases in
20-minute increments, up to 200 minutes. To change the time once the drying program is running,
press the Start/Pause button, make the time change, and then press Start/Pause again to restart.
Step 3 - Time Button
Step 4 - Start/Pause
this button to pause. Select the desired program and then press this
button again to restart.
Each of the drying programs is described below:
a) Red: The dry cycle runs at high heat and the default time is 150 minutes. The time can be
changed by pressing the Time button. This program is best for drying a heavy load.
b) Light Blue: The dry cycle runs at high heat and the default time is 200 minutes. This
program works with a sensor and will adjust the time automatically and will stop when the
clothes are dry. The time cannot be changed in this program.
c) Dark Blue: This program is the “ECO” cycle which runs intermittently with no heat and then
high heat. This program works with a humidity sensor and will adjust the time automatically.
The time cannot be changed in this program.
d) Green: The dry cycle runs at half heat and the default time is 90 minutes. The time can be
changed by pressing the Time button. This program is best for drying a light to normal load
and if you want clothes to be damp dry for ironing or for hanging up to dry.
Red Time Dry: High Heat 150
Light Blue Sensor Dry: High Heat 200
Dark Blue Sensor Dry: Air + High Heat ECO
Green Time Dry: Half Heat 90
Color Program Display
8