Use and Care Manual

Check that the door is aligned

horizontally and vertically and

that the seals are closed on all

sides before finally tightening

the top hinge.

Readjust the leveling feet.

Remove the plastic covering from the top door hinge.

Unscrew the three screws from the bottom bracket.

Remove the foot from opposite side.

Place to one side.

Slide the fridge door down about 15cm [6"] and off

the top hinge pin and lift away from the fridge.

Move the top hinge to the other side and screw it in.

Slide the fridge door back on to the top hinge, making

sure it’s the right way up. Replace the plastic covering

by clickin

g back into position on the door hinge.

Screw the bottom hinge into place on the new side.

Replace the other foot on the other side.