Owner's manual

Sleep mode
Press the Sleep button when the unit is in Cool mode.
After 1 hour the preset temperature is increased by one degree,
after another hour the preset temperature will again be increased
by one degree.
Timer (1 hour – 24 hours)
Press the Timer button and the Up and Down arrows to select how
long (hours) the unit is set to operate.
Note: Overload Protection - In the event of power loss, there is a
3-minute delay before the compressor restarts. This is to protect
the compressor.
Remote Control
The selections on the Control Panel can also be made on the
Remote Control device.
11