Combo Microwave-Oven Model – CMO 800 T INSTALLATION GUIDE these 1
MICROWAVE INSTALLATION KIT 9 8 4 7 6 3 5 94. 7 2 380 568 320 450 1 4 28. 1. Frame 1 pc 2. Fixing Bolt 4 pcs 3. Bolts (0.12” x 0.47”) 8 pcs 4. Metal Piece 5. Base Se ng Paper 6. Moun ng Bracket 1 pc 1 pc 2 pcs 7. Bolts (0.16” x 10.39”) 4 pcs 8. Locking Bracket 2 pcs 1 pc 9. Vent Shroud Technical Specifications of the Installation Kit Cavity dimensions Internal Width External FRONT HEIGHT Depth Overall Kit Dimensions 22.36'' 14.37'' 21.
INSTALLATION STEPS Vent Shroud 7 6 5 1. Install the Vent Shroud to the top of the microwave above the air inlet using the screws provided. 2. Fix the cabinet as per diagram above. Put the base setting paper (Component 5) on the bottom board of the cabinet cavity. Keep the paper’s front edge and cabinet outside edge in one line. Then put the base (Component 6) on the paper and adjust adjust their holes as per the hole position in the drawing. Then, fix the required bolts. Metal Sheet 3.
