User Manual

59
19. Brief Instructions
3 Step 1
Install the mast (own mast or sepa-
rately purchased mast) and put on the
multipurpose sensor
(See from Page 11)
Step 2 4
Open the battery compartment of the
multipurpose sensor, turn the lower
part to the left and slide it downwards
(See from Page 11)
3 Step 3
Insert the batteries into the multipur-
pose sensor, close the battery com-
partment
(See Page 13)
Step 4 4
Insert the batteries into the base sta-
tion; DO NOT PRESS ANY KEY at the
base station!
(See Page 14)
3 Step 5
Wait 15 minutes to allow the base
station to identify the sensor(s)
(See Page 14)
Step 6 4
Configure the base station (set the
date, time, etc.)
(See from Page 18)
3 Step 7
Set up the base station by using a foot
or hanging it on the wall
(See Page 15)
45
Appendix B: Table of time zone difference from UTC
Enter the difference from UTC (Coordinated Universal Time)/GMT (Greenwich Mean
Time) for your time zone when you configure the Professional Weather Station as
par section 3.1. Do not consider daylight saving time when making this entry. Follow
instuctions for setting the status of daylight saving time as a separate entry.
Time Zone Major Cities Symbol Difference
from UTC
Atlantic Time San Juan AST 20
Eastern Time Boston, New York, Washington DC, EST 19
Miami
Central Time Minneapolis, New Orleans, Houston, CST 18
Chicago
Mountain Time Salt Lake City, Boise, Denver MST 17
Pacific Time Seattle, San Francisco, Los Angeles, PST 16
Las Vegas
Alaska Time Fairbanks AKST 15
Hawaii-Aleutian Honolulu HAST 14
Time