Technical data

65
obtain the very latest weather data, enabling you to track the wind direction and wind veloci-
ty trend, for example, for 10 seconds.
As the combination sensor switches to receive data more often when “LIVE MODE” is active,
itconsumesmorecurrent,whichhasanadverseeectonbatterylife.Therefore,the“LIVE
MODE” menu can be used to set a period of time for which “LIVE MODE” will remain active.
During this period the main menu line will also display the “REQ” touch eld, which is used to
request the live retrieval of data described above.
- Select the “LIVE MODE” menu:
NEXT LIVE MODE ENTER
- Touch “ENTER” and the following appears:
BEGIN +16.00-
- Touch “+” or “-” to set the switch-on time for “LIVE MODE”.
- Touch “BEGIN” and the following appears:
END +23.45-
-Touch“+”or“-”tosettheswitch-otimefor“LIVEMODE”.
- Wait for a few seconds. The device will then return to normal mode and the data
that has just been set will become active.
- The menu line indicates that data is being transmitted to the combination sensor
with the message: “WAIT FOR TRANSMISSION”. The weather station cannot be
operated for as long as this message is displayed.
- When “LIVE MODE” is active, the menu also displays the “REQ” touch eld for
retrieving data:
MIN MAX RESET REQ CFG
4.3.11 „STATE“ menu, display of memory state
The utilisation of the internal data memory can be displayed in this menu. The value that is
displayed represents the amount of memory usage in percent.
- Select the „STATE“ menu:
NEXT STATE ENTER
- Touch „ENTER” and the following appears:
MEMORY USAGE 050
- The displayed values show the amount of memory usage in percent (e.g. 50%, see above).