User Manual

44
The procedure is described in the center software
instructions.
10 Error messages
10.1 Weak battery
If the batteries are weak, the respective error code
(see section "Installing and changing batteries") is
shown.
If the batteries are so weak that a reset is triggered
several times in a row without transmitting suc-
cessfully, no transmission will be made for following
button presses and the LED will only be illuminated
in red for 0.5 seconds.
10.2 Command not confirmed
If a receiver does not confirm a command (at least
one when more than one have been taught), the
device LED is illuminated in red when the transmis-
sion is complete.