Manualshelf

User Manual

ManualsBrandseQ-3 ManualsHome AutomationSensor 868.3 MHz White 17 x 77 x 16 mm
31323334353637383940
40
The teach button is located at the rear of the elec-
tronics unit. This button is located within a recess so
that it cannot be pressed accidentally.
To actuate teach mode on the shutter contact, press
the teach button with a pointed object. The device
LED flashes orange.
(Abort with a short press of the teach button, the
device LED will then illuminate in red.)
If no teaching occurs, teach mode is automatically
ended after 20 seconds. If other devices are in teach
mode, these are taught.
If learning is completed successfully, it is indicated
with the flashing green LED (length of time depends
on whether it is still configuring).