User Manual

Now, use one or more provided spacer-pieces (A) if

necessary, in order to move the magnets (B) to the

level of the electronics unit (screw installation only).

Note the following: When using the 14.5 mm

spacer-piece (A), you must then fasten it with

two screws 2.2 x 16 mm and then fasten the magnet

unit (B) onto it with two other screws. The ﬂatter

spacer-pieces are simply fastened together with the

magnets with 2 screws 2.2 x 16 mm (C).

Then push the cover (D) of the magnets until latching

on the magnet holder.