User Manual

1 Screws 2.2 x 16 (4x)

2 Screws 2.2 x 13 (2x)

Spacer-piece for height correction of magnets

3 Spacer-pieces 14.5 mm

4 Spacer-pieces 5 mm

5 Spacer-pieces 3 mm

6 Magnet

7 Magnet cover

8 Wall holder

9 Electronics unit

6.2 Installation

Please read this section completely before starting

any installation work!

You can use the screws provided to fasten the

shutter contact or use the provided doubled-sided

tape as an alternative. There is no damaged caused

to the doors and windows when installing with the

double-sided tape. When fastening with double-

sided tape, no additional spacer-pieces have been

used for reasons of stability.