Operation Manual

26
PRO: For setting the weekly program (see Section “1 •
Setting the weekly program”)
DAT: For modifying the time of day and date•
POS: For querying the actuator’s current position•
DST: Automatic switchover at the start or end of daylight •
saving time can be deactivated.
AER: For setting the “window open” temperature and time •
so that the temperature is automatically reduced in the
event of ventilation
TOF: For setting the offset temperature•
RES: For restoring the factory settings•
Use the setting wheel to select menu items and the OK but-
ton to confirm your choice. Press the menu button again to
return to the previous level. After 65 seconds without any-
thing happening, the menu will close automatically.
5. Display content during normal operation
During normal operation, the
following are displayed: switch-
ing periods, operating mode,
temperature setting and day
of the week.
The bars indicating the week-
ly program’s switching periods are shown for every other
time interval. For an example, please refer to “2. Weekly
program: Examples”.
6. Setting the holiday function
If you want a fixed temperature to be maintained for a set
period of time while you are on holiday or during a party,
you can make use of the Holiday function.
Press and release the menu button repeatedly until the •
suitcase symbol (
) appears on the display.