Operation Manual

23
“INS” will appear on the display, press the OK button.•
The actuator will perform an adjustment run (“ADA” will •
appear on the display, operation not possible).
After that, the actuator will be ready for operation (Auto •
mode).
If the adjustment run was initiated prior to installa-
tion, or if an error message will be displayed (F1, F2,
F3); press OK to move the motor back to the “INS”
position.
1. Setting the weekly program
The weekly program allows you to set up to 3 separate
heating periods (7 switching times) for each day of the
week. Programming is performed in relation to the se-
lected days, for which temperatures must be stored for a
period from 00:00 to 23:59.
Press and hold down the menu button for more than 3 seconds.
“PRO” will appear on the display.•
Confirm with OK.•
“DAY” will appear on the display. The setting wheel can •
be used to select an individual day of the week, all wor-
king days, the weekend or the entire week (example
shows working days selected).
Confirm with OK.•
The first setting time will appear on •
the display (0:00). This cannot be
changed. In addition, the display
shows bars for every other swit-
ching interval.
Confirm with OK.•
Set the temperature that is to be •
maintained from 0:00 onwards (ex-
ample shows 17.0°C).
Confirm with OK.•