Operation Manual

20
II. General function
This energy-saving controller for radiators can be used to
control room temperature on the basis of time. The actuator moves
a valve, thereby allowing the amount of heat flowing to the heat-
ing appliance to be controlled. The controller is compatible with all
standard heating appliance valves.
Installation can be achieved in 3 easy steps.
Step 1: Inserting (replacing) the batteries
Remove the battery com-•
partment cover.
Insert 2 new LR6 batter-•
ies (Mignon / AA) into the
battery compartment, en-
suring they are the right
way round.
Reattach the battery com-•
partment cover and click
into place.
New alkaline batteries have a life of approximately 3 years.
A battery symbol (
) will indicate when the batter-
ies need to be replaced. After removing the old batter-
ies, please wait approximately 1 minute before inserting
the new ones.
Never recharge standard batteries.
Doing so will present a risk of explosion.
Do not throw the batteries into a fire.
Do not short-circuit batteries.
Used batteries should not be disposed
of with regular domestic waste. Instead,
they should be taken to your local battery
disposal point.