User manual

3535
6.1. Adapters for Danfoss
One of the enclosed adapters is required for installation
on Danfoss valves. The arrangement of the suitable ad-
apter ring for the appropriate valve can be found in the
following gures:
Take care during installation that you do not trap your
ngers between the two halves of the adapter!
The Danfoss valve bodies have elongated indentations (E)
running all around (see arrow), which also ensure better
seating of the adapter after it has been latched into place.
When installing, please ensure that the spigots inside
the adapter (D) are in the same position as the inden-
tations (E) on the valve.Latch the adapter, which cor-
responds to the valve, completely onto the valve body.