Instructions

If the adapon run has been iniated prior to installing, please
press the control wheel briey and the motor reverses to the
“INS” posion. If an error message (F1, F2, F3) is displayed, the
motor similarly travels back to the “INS” posion (see secon
25).
11. Seng the program for the week
For each day, up to 3 heang phases (7 change sengs) can be set sep-
arately. The programming is carried out for the selected days, where-
by temperature sengs have to be set for the enre period between
00:00 and 23:59.
The device is pre-programmed with a schedule for the week (see sec-
on 11.1). To set your own schedule, please follow the instrucons
below:
• Press the Mode/Menu buon for at least 3 seconds. „PRO“ appears
in the display. Conrm by pressing the control wheel briey.
• „DAY“ appears in the display. Rotate the control wheel to select
either a single day of the week, all weekdays, the weekend, or the
enre week.
• Conrm by pressing the control wheel briey.
• The rst switching me point is displayed (0:00), this can not be
changed.
• Conrm by pressing the control wheel briey.
• Now set the temperature which is desired from 0:00hrs.
• Conrm by pressing the control wheel briey.
• The next switching me point is displayed. You can adjust this by
rotang the control wheel.
• N o w s e t th e te m p e r a t u r e w h i c h s h o u l d p r e v a i l f r o m t h e s e l e c t e d  m e .
• Repeat this procedure unl all the other desired temperatures for
the me period from 0:00 to 23:59 have been stored.
• If all 7 switching me points have been allocated, 23:59 is displayed
as the nal switching point to be conrmed.
Bars for switching me periods for every second me interval
are shown in the display.
In auto mode, the temperature can be changed at any me using
the control wheel. The modied temperature will then remain
the same unl the next point at which the program changes.
11.1 Week program: Example
For each day of the week up to 3 heang phases (7 change sengs)
with individual temperature sengs can be saved with the radiator
thermostat.
Two heang phases from 6:00 to 9:00 and from 17:00 to 23:00 for all
weekdays alike are saved as factory sengs:
from 00:00 to 06:00 17.0 °C
from 06:00 to 09:00 21.0 °C
from 09:00 to 17:00 17.0 °C
from 17:00 to 23:00 21.0 °C
from 23:00 to 23:59 17.0 °C
In this example, bars are displayed only for the intervals 06:00
to 09:00 h and 17:00 to 23:00 h.
12. Display content in normal mode
Switching me periods, operang mode,
programmed temperature and week day are
displayed in normal mode.
The bars for switching me periods of the week
program will be displayed for every second
me interval (please see “11.1 Week program: Example”).
13. Boost funcon
The boost funcon makes use of human sensaons of heat. When ac-
vang the boost funcon, the heang valve is immediately opened
to 80 % for 5 minutes (factory seng). The heang of a room takes
longer than 5 minutes, but the heat given o by the radiator can be
felt immediately. If, for example, you arrive home earlier than usual or
you need some extra heat in the morning in the bathroom, the boost
funcon will help you to heat the room up quickly.
• Press the control wheel briey to acvate the boost buon.
• The remaining me for the funcon will be counted down in sec-
onds (“B299” to “B000”).
• Aer these 5 minutes have elapsed, the device changes to the mode
which was previously acve (auto/manu) with the previously set
temperature.
• The funcon can be deacvated prematurely at any me by press-
ing the control wheel again.
The boost funcon will not have an immediate eect if the ra-
diator is covered or concealed (e.g. by a sofa). The open-window
funcon is deacvated while the boost funcon is acve.
14. Seng the holiday funcon
If you want to maintain a xed temperature for a certain period, e.g.
during your holidays or a party, the holiday funcon can be used.
• Briey press the Mode/Menu buon repeatedly, unl the suitcase
symbol ( ) appears in the display.
• Change the me unl which the temperature shall remain with the
control wheel and conrm by pressing the control wheel briey.
• Then set the date and conrm by pressing the control wheel briey.
• Set the temperature and conrm by pressing the control wheel
briey. The display will ash to conrm.
The set temperature will remain unl the set end me. Aerwards,
the radiator thermostat will switch back to auto mode.
15. Comfort and eco temperature
The comfort and eco temperature buon ( ) makes switching be-
tween comfort and eco temperature simple and user friendly. The
factory seng for the comfort temperature is 21.0 °C and the eco
temperature 17.0 °C. They can be adjusted as follows:
• Press and hold the comfort/eco buon ( ) for at least 3 seconds.
• The sun symbol ( ) and the currently stored comfort temperature
appear in the display.
• Change the temperature with the control wheel and conrm by
pressing the control wheel briey.
• The moon symbol ( ) and the currently stored eco temperature
appear in the display.
• Change the temperature with the control wheel and conrm by
pressing the control wheel briey.
Even in auto mode, the temperature can be changed at any me using
the buon. It will then remain the same unl the next point at which
the program changes.
16. Display of valve posion
You can request the current posion of the valve. To do this, proceed
as follows:
• Press the Mode/Menu buon for at least 3 seconds.
• Choose the menu item “POS” by rotang the control wheel.
• Conrm by pressing the control wheel briey.
• The display will show the current posion of the valve drive.
17. Child safeguard/operang lock
The operaon of the device can be locked.
• To acvate/deacvate the operang lock, press the Mode/Menu
and buon at the same me.
• Aer it has been successfully acvated, “LOC” appears in the display.
• To deacvate the operang lock, press both buons again.
18. Acvate heang pause (baery saving)
Baery life can be prolonged by switching the heang o in summer.
To achieve this, the valve is opened fully. The de-calcicaon protec-
on connues to run.
To acvate the heang pause, proceed as follows:
• Turn the control wheel in manu mode (manu) to the right unl “ON”
appears in the display.
• To end it, exit the manu mode (manu) or turn the selector dial to
the le.
19. Set frost protecon mode
If a room is not to be heated, the valve can be closed.
• Turn the control wheel in manu mode (manu) to the le unl “OFF”
appears in the display.
The valve is only opened if there is a risk of frost. The de-calcicaon
protecon connues to run.
• To end it, exit the manu mode (manu) or turn the control wheel to
the right.
20. Switch between summer and winter me
The automac switching between summer and winter (and vice versa)
on the agreed European date occures in the early hours of the Sunday.
The automac switching is acvated in the factory sengs. It can be
manually deacvated as below:
• Press the Mode/Menu buon for at least 3 seconds.
• Choose the menu item “DST” with the control wheel.
• Conrm by pressing the control wheel briey.
• Set the opon “OFF” to deacvate automac switching or set the
opon “ON” to ac vate a u t o m a  c s w i t c h i n g w i t h the control wheel.
• Conrm by pressing the control wheel briey.
21. Open-window funcon
With a rapidly reducing temperature, the radiator thermostat automat-
ically detects that a room is being venlated. In order to save heang
costs, the temperature is then regulated down for a certain period of
me (15 minutes, set at the factory). Whilst this funcon is acve, the
open-window symbol ( ) appears on the display.
To congure the funcon, proceed as follows:
• Press the Mode/Menu buon for at least 3 seconds.
• Select the menu item “AER” with the control wheel and conrm by
pressing the control wheel briey.
• The temperature and me can be set with the control wheel. The
funcon can be deacvated by selecng “0” for the me.
22. Set oset temperature
As the temperature is measured at the radiator, the temperature dis-
tribuon can vary throughout a room. To adjust this, a temperature
oset of up to ±3.5 °C can be set. If a nominal temperature of e.g. 20
°C is set but the room presents with only 18 °C, an oset of -2.0 °C
needs to be set.
To set the oset temperature proceed as follows:
• Press the Mode/Menu buon for at least 3 seconds.
• Select the menu item “TOF” with the control wheel and conrm by
pressing the control wheel briey.
• Turn the control wheel for as long as necessary unl the desired
temperature oset appears.
• Conrm by pressing the control wheel briey.
23. Restoring the factory sengs
The factory sengs of the radiator thermostat can be restored man-
ually. If you do this, you will lose all your sengs.
To do this, proceed as follows:
• Press the Mode/Menu buon for at least 3 seconds.
• Select the menu item “RES” with the control wheel and conrm by
pressing the control wheel briey.
• “CFM” then appears in the display.
• Conrm by pressing the control wheel briey.
24. Intended use
The programmable radiator thermostat is used to control a conven-
onal thermostac radiator valve. Only operate the device in inside
rooms and avoid the inuence of moisture, dust and sunlight or ex-
ternal heat radiaon.
Using the radiator thermostat for any purpose other than that de-
scribed in this operang manual does not fall within the scope of in-
tended use and shall invalidate any warranty or liability. This also ap-
plies to any conversion or modicaon work. The device is intended
for private use only.
25. Troubleshoong and maintenance
Error code on
the display
Problem Soluon
Baery symbol
( )
Baery output too
low
Replace baeries
F1
Valve drive slug-
gish
Check installaon,
check the heang valve
F2
Adjustment range
too wide
Check the fastening of the ra-
diator thermostat
F3
Adjustment range
too small
Check the heang valve
The radiator thermostat performs a roune descaling run once
a week on Saturday at 12:00 to protect against calcicaon of
the valve. During this “CAL” appears in the display.
26. Technical characteriscs
Device short descripon: CC-RT-M-EQ
Supply voltage: 2x 1.5 V LR6/Mignon/AA
Current consumpon: 100 mA (max.)
Baery life: 3 years (typ.)
Degree of protecon: IP20
Degree of polluon: 2
Ambient temperature: 0 to 50 °C
Surface temperature: 90 °C (at the radiator)
LCD: 85 segments
Connecon: M30 x 1.5 mm
Method of operaon: Type 1
Linear travel: 4.3 mm
Dimensions (W x H x D): 58 x 63 x 122 mm
Weight: 176 g (incl. baeries)
Subject to technical changes.
Bevollmächgter des Herstellers:
Manufacturer’s authorised representave:
eQ-3 AG
Maiburger Straße 29
26789 Leer / GERMANY
www.eQ-3.de