Installation guide

QuadroM32x/8L/26x/12Li/26xi Manual II: Administrator's Guide Administrator’s Menus
QuadroM32x/8L/26x/12Li/26xi; (SW Version 5.3.x)
96
The UDP Port indicates the SIP UDP (User Datagram Protocol)
receive port number. By default 5060 is selected and used. The SIP
UDP port cannot be in the selected RTP/RTCP port range for FXS
and IP lines (see
RTP Settings), otherwise the “Mapped port for SIP
shouldn’t be in RTP port range” error message appears.
The TCP Port indicates the SIP TCP (Transmission Control Protocol)
receive port number. By default, 5060 is selected and used.
Please Note: Quadro will not use TCP protocol as a transport for SIP
messages if the TCP Port field is left empty.
The TLS Port indicates the SIP TLS (Transport Layer Security)
receive port number. By default, TLS port is not used and is empty
(coded to 0). TLS port number should be different from the TCP Port
number.
The Realm text field requires messaging level information to be
included in SIP messages sent by Quadro. This information might be
used by remote side for authentication purposes.
Fig. II-165: SIP Settings page
Enable Session Timer enables advanced mechanisms for connection activity checking. This option allows both user agents and proxies to
determine if the SIP session is still active.
The DNS server for SIP radio button group allows you to choose between regular DNS servers configured in the
DNS Settings page and specific
DNS servers for SIP traffic.
• Use default is used to apply regular DNS servers for SIP traffic.
• Specific is used to enable SIP specific DNS servers. For this selection, both primary and secondary SIP DNS servers should be defined in the
SIP DNS 1 and SIP DNS 2 text fields. At the least, a primary DNS server should be inserted.
The SIP Timers radio button group is used to define the timeouts of the SIP messages retransmission.
• RFC 3261 will apply standard SIP timers described in the corresponding specification.
• High availability will apply SIP timers to shorten the call establishment, registration confirmation and registration failure procedures. This
selection provides more firmness to the SIP connection but increases the network traffic on the Quadro.
• Custom allows manually defining the Registration Timeout, Registration Failure Timeout, Transaction Duration and Session refresh
timeout SIP timers (in seconds).
Host aliases for SIP link leads to the page where Quadro's external aliases are listed.
Generate And Install New CA Root Certificate link leads to the page where new CA root certificate may be defined, generated and installed.
Download Current CA Root Certificate link is used to download the actual CA root certificate in a .crt format.
Host aliases for SIP
This page is used to create a list of Quadro's hostnames register
on remote DNS servers. This list will be used to identify SIP
packets received from remote servers where Quadro is
registered with different names.
The Host aliases for SIP page consists of a table where
Quadro's aliases are listed. Add opens the Add Entry page
where a new alias name for Quadro should be defined.
Fig. II-166: Host aliases for SIP page