Installation guide

QuadroM32x/8L/26x/12Li/26xi Manual II: Administrator's Guide Administrator’s Menus
QuadroM32x/8L/26x/12Li/26xi; (SW Version 5.3.x)
58
The Paging Group of Extension page lists all available regular
and virtual extensions on the Quadro and allows you to manage
the Paging Group.
The Enable functional button is used to include the selected
extension(s) to the Paging Group of the corresponding
extension. Once the call to the paging group comes in, all the
extensions in that group will be paged, i.e. will automatically go
off-hook (by automatic activation of the phone’s speaker).
The Disable functional button is used to exclude the selected
extension(s) from the Paging Group of the corresponding
extension.
Fig. II-104: Paging Group of Extension page
The Edit Access List link leads to the page where permissions
for users to use the Paging Group service can be defined.
The Access List of Extension page lists all users (or a group
of users if a wildcard is used) and the appropriate permissions
to use the Paging Group through the corresponding extension.
Fig. II-105: Access List of Extension page for Paging group
The Add functional button opens an Add Entry page where a
new user with corresponding permissions might be created.
This page consists of the following components:
Call Type lists the available call types:
• PBX - local calls from Quadro’s extensions
• SIP – calls through a SIP server
• PSTN – calls from global telephone network
• Auto – used for undefined call types. The destination
(independent on whether it is a PBX number, SIP
address or PSTN number) will be parsed through Call
Routing Table.
Fig. II-106: Access List of Extension –Add Entry page for Paging Group
The Address text field is used to define the address to be included in the Access List table. The value in this field is strictly dependent on the Call
Type defined in the same named drop down list. If the PBX call type is selected, the Quadro extension number should be defined in this field. For the
SIP call type, the SIP address should be defined, for the PSTN call type, the PSTN user number should be defined here.
The Action drop down list is used to select the defined user’s permissions (allow or deny) to use the Paging Group service for the extensions
included in the Paging Group table.
ACD Group Extension Settings
For ACD Group extensions, the Extensions Management - Edit Entry page consists of General Settings, SIP Settings and SIP Advanced
Settings pages. The SIP Settings and SIP Advanced Settings pages are the same as for the regular extensions described above. The General
Settings page is described below:
1. General Settings (for ACD Group extension)
This group requires ACD group extension‘s information and has
the following components:
Display Name is an optional parameter used to recognize the
ACD Group. Usually the display name appears on the called
party’s phone display when a call is made or a voice mail is
sent. This information is also displayed in the
ACD
Management Groups table.
Password requires a password for the ACD Group extension.
Fig. II-107: Extensions Management - Edit Entry – General Settings page (for ACD Group extension)