Installation guide
QuadroM32x/8L/26x/12Li/26xi Manual II: Administrator's Guide Administrator’s Menus
QuadroM32x/8L/26x/12Li/26xi; (SW Version 5.3.x)
57
• snom 820 • Grandstream GXP2120 • Yealink SIP-T38G
• snom 821 • Grandstream GXP2124
• Yealink SIP-T46G
• snom 870 • Grandstream GXP2200
•
Yealnik VP530
•
Aastra 480i
•
Grandstream GXV3140
•
Linksys SPA942
•
Aastra 9133i •
Grandstream GXV3175
• Linksys SPA941
• Aastra 9112i • Fanvil C62
• Linksys SPA922
•
Aastra 9143i •
Polycom SoundPoint IP 300SIP
•
Linksys SPA921
•
Aastra 9480i (35i) •
Polycom SoundPoint IP 330SIP
•
Linksys SPA2002
• Aastra 51i • Polycom SoundPoint IP 331SIP
• Linksys SPAPAP2T
• Aastra 53i • Polycom SoundPoint IP 501SIP
• AudioCodes 310HD
• Aastra 55i • Polycom SoundPoint IP 550SIP
• AudioCodes 320HD
•
Aastra 57i
•
Polycom SoundPoint IP 601SIP
•
Panasonic KX-UT136
•
Aastra 6730i •
Polycom SoundPoint IP 650SIP
• Panasonic KX-UT123
• Aastra 6731i • Polycom SoundStation IP 6000
• Panasonic KX-TGP550T04
•
Aastra 6735i •
Polycom VVX 1500 •
Alcatel Temporis IP200
•
Aastra 6737i •
Polycom VVX 300/310 •
Alcatel Temporis IP600
• Aastra 6739i • Polycom VVX 400/410 • Alcatel Temporis IP800
• Aastra 480e
The Paging Group list is used to define the extensions that will be paged. They will automatically go off-hook when the paging call comes in.
The Access List is used to define PBX, SIP or PSTN users that are explicitly allowed/forbidden to activate the call paging using the corresponding
extension.
When calling to the Paging Group extension, the call will be forwarded to the extensions listed in the Paging Group table. The phones of the called
extensions will automatically go off-hook (the phone speaker automatically becomes activated) and the caller will be able to make his announcement.
Since the paging call opens one-way communication, the called extensions will not be able to give an answer to the caller. To terminate the paging
call, caller should simply hang up.
Attention: Call paging will not work if the called extension is in call.
When caller not listed in the Access List calls the Paging Group extension, password authorization (using the password of the Paging Group
extension) will be required to start the call paging. When a denied user tries to call the Paging Group extension, “Party does not accept your call”
message will be played to the caller. When caller dials the Paging Group extension with empty Paging Group table, “Number dialed temporarily
unavailable” message will be played to the caller.
For Paging Group extensions, Extensions Management - Edit Entry page consists of General Settings, SIP Settings and Advanced SIP
Settings pages. The SIP Settings and Advanced SIP Settings pages are the same as for the regular extensions (see
User Extension Settings
),
while General Settings page has a different content:
1. General Settings (for paging group extension)
This group requires personal extension information and has the
following components:
Display Name is an optional parameter used to recognize the
caller. Usually the display name appears on the called party’s
phone display whenever a call is performed.
Password requires a password for the new extension.
The extension password may only contain digits. If non-numeric
symbols are entered an “Incorrect Password: no symbol
characters allowed” error will prevent making the extension.
If you are unable to define a strong password, press Choose
Generated Password to use one of system defined strong
passwords. The Password field is checked against its strength
and you may see how strong is your inserted password right
below that field.
Confirm Password requires a password confirmation. If the
input is not corresponding to the one in the Extension
Password field, the error will appear: “Incorrect Password
confirm”.
Fig. II-103: Extensions Management - Edit Entry – General Settings for paging extension page
The Edit Paging Group link leads to the page where a list of extensions to be paged can be selected.