Installation guide

QuadroM32x/8L/26x/12Li/26xi Manual II: Administrator's Guide Administrator’s Menus
QuadroM32x/8L/26x/12Li/26xi; (SW Version 5.3.x)
56
2. Park Access List
This page is used to define a list of extensions that are allowed
to park the call to the corresponding call park extension.
Wildcard is supported in the Address field to add a group of
extensions with one entry.
If the extension is not in the Park Access List for the
corresponding call park extension, it will not be able to park a
call to this call park extension.
By default, this table contains a “*” entry which allows any PBX
users to park the call to this extension.
Attention: If you modify the Park Access List by adding new
extensions, do not forget to remove the default “*” entry from the
list for the new configuration to take effect.
Fig. II-100: Extensions Management - Edit Entry – Park Access List for call park extension
3. Retrieve Access List
This page is used to define a list of callers that are allowed to
retrieve a call parked to the corresponding call park extension.
If the caller is not in the Retrieve Access L
ist for the
corresponding call park extension, it will not be able to pickup a
call parked to this call park extension.
By default, this table contains an “Auto-*” entry which allows any
caller to pickup the call parked to this extension.
Attention: If you modify the Retrieve Access List by adding new
callers, do not forget to remove the default “Auto-*” entry from
the list for the new configuration to take effect.
The Add functional button opens an Add Entry page where a
new caller can be added to the list. This page consists of the
following components:
Call Type lists the available call types:
• PBX - local calls from Quadro’s extensions
• SIP – calls through a SIP server
• PSTN – calls from global telephone network
• Auto – used for undefined c
all types. The destination
(independent on whether it is a PBX number, SIP address
or PSTN number) will be parsed through Call Routing
Table.
Fig. II-101: Extensions Management - Edit Entry – Retrieve Access List for call park extension
Fig. II-102: Extensions Management - Edit Entry – Retrieve Access List for call park extension
The Address text field is used to define the address to be included in the Retrieve Access List table. The value in this field is strictly dependent on
the Call Type defined in the same named drop down list. If the PBX call type is selected, the Quadro extension number should be defined in this
field. For the SIP call type, the SIP address should be defined, for the PSTN call type, the PSTN user number should be defined here. The wildcard
is supported in this field. Wildcard is available for this field.
Paging Group Extension Settings
Paging Group & Access List
The Paging Group service is used to page a group of extensions by forcing extensions to go off-hook and opening one-way communication. The
service is particularly used for announcements addressed to a group of extensions. Service allows to page multiple extensions by dialing the Paging
Group extension.
Please Note: The Paging Group service requires called extensions to use one of the following SIP or analog phones which are able to
automatically go off-hook:
• snom 300 • Grandstream BT200 • Akuvox SP-R53P
• snom 320 • Grandstream GXP1400 • Thomson ST2030S
• snom 360 • Grandstream GXP1405 • Yealink SIP-T20P
• snom 370 • Grandstream GXP1450 • Yealink SIP-T22P
• snom 710 • Grandstream GXP2000 • Yealink SIP-T26P
• snom 720 • Grandstream GXP2100 • Yealink SIP-T28P
•
snom 760
•
Grandstream GXP2110
•
Yealink SIP-T32G