Installation guide

QuadroM32x/8L/26x/12Li/26xi Manual II: Administrator's Guide Administrator’s Menus
QuadroM32x/8L/26x/12Li/26xi; (SW Version 5.3.x)
52
• Use External Voice Mail – enables the Voice Mail service
for the corresponding extension and is used to define a
remote Voice Mail Server as a location for the Voice Mails.
In this case recorded voice mails will be collected on the
remote server. Radio button selection enables a sub-group
of manipulation radio buttons:
• If the remote Voice Mail Server is combined with
the SIP Proxy server, it is recommended to select
Proxy Controlled Mailbox Type
. With this
selection, SIP proxy will keep the recorded voice
mail on itself. When exte
nsion accesses his
mailbox by dialing *0, the call will be redirected to
the voice mailbox on the proxy server.
• If the remote Voice Mail Server acts as a
standalone location of voice mails, it is
recommended to select Independent Mailbox
Type. With this se
lection, Quadro redirects the
recorded voice mails to the defined remote Voice
Mail server. When extension accesses his mailbox
by dialing *0, the call will be redirected to the
remote voice mail server.
For each of these selections, it is required to enter the SIP URI
of the Voice Mail Server where voice mails of the corresponding
extension will be collected.
The Transport Protocol for SIP messages radio buttons allow
the transport protocol (UDP or TCP) for transmission of SIP
messages to be selected.
Fig. II-92: Extensions Management - Edit Entry – Voice Mailbox Settings page
• With MS Exchange Server you can keep recorded voice messages into one universal inbox.
o UM Auto Attendant URI text field requires the SIP URI of the MS Exchange Server. When extension accesses his mailbox by
dialing *0, the call will be redirected to the voice mailbox on the MS Exchange Server.
o UM Extension text field requires an extension number that Unified Messaging will use when voice mail is submitted to the user's
MS Exchange Server mailbox.
Please Note: W hen the MS Exchange Server option is selected as an external voice mail server, the transport protocol TCP is automatically used
regardless of the Transport Protocol for SIP messages radio button selection.
Attention: By choosing the Use External Voice Mail option, some internal voice mailbox services may become unavailable. Instead, the services of
the external voice mail server will become available to the user. Please consult with the external voice mail server administrator before enabling this
option.
7. Class of Service Settings
The Class of Service Settings page is used to assign the
defined classes to a PBX extensions.
To use Class of Service feature it should be enabled from the
Class of Service page.
Class of Service
feature allows to specify which
PBX/Conference extensions can use which routing rules to
make a call. For example, if an extension is not assigned to a
certain class of service and an attempt is made to place a call
from that extension using routing rule with the Class of
Service feature enabled, then "Number dialed does not exist"
message will be played to the caller.
The Go to Class of service link leads to the
Class of
Services page where the class of services can be configured.
The Go to Call Routing Table link leads to the Call Routing
Table
page where the call routing rules can be assigned to a
certain class of service(s). The classes defined in the Class of
Services page will appear on this page to assign the PBX
extensions to a certain class of service(s).
PBX extensions can be attached to a several class of services
at the same time.
Fig. II-93: Extensions Management - Edit Entry – Class of Service Settings page