Installation guide

QuadroM32x/8L/26x/12Li/26xi Manual II: Administrator's Guide Administrator’s Menus
QuadroM32x/8L/26x/12Li/26xi; (SW Version 5.3.x)
48
• Allow Dialog Subscriptions
Edit opens a page Watch Access List-Edit Entry where the permissions of the added extensions may be modified.
Delete removes the selected extensions from the list. If no records are selected an error message occurs.
Select all selects all existing records in the list.
Inverse selection inverses the current selection of records (if no records are selected, all records will be checked).
2. SIP Settings
This group is used to configure extension’s SIP registration
settings and consists of the following components:
User Name requires a user name for the extension registration
on the SIP server. The registration user name needs to be
unique on the SIP server and it is displayed on the called phone
when performing an IP call. This field length is limited to 32
symbols.
Password indicates the password for the extension registration
on a SIP server.
Registration Password is used to confirm the password. If the
entered password does not correspond to the one entered in the
Password
field, the error message “The passwords do not
match. Please try again” will appear.
Fig. II-88: Extensions Management - Edit Entry – SIP Settings page
SIP Server indicates the host address of the SIP server. The field is not limited regarding symbol usage or length. It can be either an IP address
such as 192.168.0.26 or a host address such as sip.epygi.com.
SIP Port indicates the host port number to connect to the SIP server. The SIP server port may only contain digit values, otherwise the error message
“SIP Server Port is incorrect” will be displayed when applying the extension settings. If the SIP server port is not specified, Quadro will access the
SIP server through the default port 5060.
Registration on SIP Server enables the SIP server registration option. If the extension has already been registered on an SIP server, its IP address
will be displayed in brackets.
3. SIP Advanced Settings
This group is used to configure advanced SIP settings (Outbound Proxy, Secondary SIP Server and Outbound Proxy for the Secondary SIP Server
settings and to define other SIP server specific settings).
The SIP Outbound proxy is an SIP server where all the SIP requests and other SIP messages are transferred. Some SIP servers use an outbound
proxy server to escape restrictions of NAT. For example, Free World Dialup service uses an Outbound Proxy server. If an Outbound proxy is
specified for an extension, all SIP calls originating from that extension are made through that outbound proxy, i.e., all requests are sent to that
outbound proxy, even those made by Speed Calling.
The Secondary SIP Server acts as an alternative SIP registration server when the primary SIP Registration Server is inaccessible. If the connection
with the primary SIP server fails, Quadro will automatically start sending SIP messages to the Secondary SIP Server. It will switch back to the
primary SIP server as soon as the connection is reestablished.