Installation guide

QuadroM32x/8L/26x/12Li/26xi Manual II: Administrator's Guide Administrator’s Menus
QuadroM32x/8L/26x/12Li/26xi; (SW Version 5.3.x)
38
No Key Found - the feature is currently not available
Reboot Needed - the feature key has been entered and
Quadro needs to be rebooted
Activated - the feature is now available on the Quadro
Following features may be activated via the software key:
Debug enables Telnet connection towards the Quadro
for debugging purposes.
3pcc Support - enables Third Party Call Control feature on
the Quadro. The feature allows the call controlling
applications running on a user PC to remotely initiate and
handle calls on the Quadro and to subscribe for certain
event notifications from the Quadro.
ACD Support - enables the ACD Management feature
which provides contact center solution for queuing and
automatic distribution of the calls between contact center
agents.
Barge In enables the Barge In Service on the Quadro.
The feature allows the PBX users to participate to the third
party's calls while remaining imperceptible.
DCC Pro Support - allows run with Quadro the Pro-level
Desktop Communication Console (the application
description can be found at
Epygi Technical Support).
DCC Basic Support - allows run with Quadro the Basic-
level Desktop Communication Console (the application
description can be found at
Epygi Technical Support).
iQall Toggling Support - this feature enables users to
alternate the call from their mobile device iPhone running
iQall to their desk phone without the call being dropped.
IP Phone Support - enables additional LAN-sided IP
phones support on the Quadro. This feature key allows you
to activate three packages of IP lines support. With the first
inserted feature key, additional 32 IP lines will be activated.
With the second and third inserted feature keys, 64
additional IP lines will be activated each time.
Autodialer Support -
allows run with Quadro the
Autodialer application (the application description can be
found at
Epygi Technical Support).
QCM Support allows Quadro’s extensions to be used by
Quadro Communication Manager after QCM trial period
expires. Depending on the feature key type, additional 4 or
10 QCM licenses can be activated on the Quadro.
Fig. II-66: Features page
Fig. II-67: Features Add page
Conference Server - activates the Conference Server feature on the system, enabling it to act as a standalone conference server. This
allows up to 64-person conference calls to be set up and offers a bundle of helpful features to manage the conferences.
Call Recording activates the Call Recording feature which is used to record PBX, SIP or PSTN calls on the Quadro and save the
recordings into the local recording box or upload to the remote server.
Video Conferencing activates the Video Conferencing feature on the system. This allows video conference calls of up to 16 participants
for QuadroM32x and up to 10 participants for QuadroM8L/26x/12Li/26xi.
To enter a Feature Key, click Add. A page with the Feature Key text field is opened. Enter the key and press Save. The status of the selected
feature entry will change to Reboot needed. Reboot the Quadro and the feature will receive the status Activated.
To receive a Feature Key, register the Quadro device and send a corresponding request to Epygi's Technical Support. This request must include the
Unique ID that is displayed in the Features page above the features list.
Upload Language Pack
The Upload Language Pack page allows you to upload a custom language for GUI and Voice Messages of the Quadro. The language of voice
messages can be switched to the custom Language Pack language from the GUI setting page in the
System Configuration Wizard. The language of
GUI session can be changed to the custom Language Pack language from the radio buttons on the login page.
Uploading a language pack will also change the language of some supported IP phones (Aastra, snom v.6.x, Grandstream GXP2000). After a
custom Language Pack is uploaded onto the system, reboot the IP phone to load a matching language onto the phone.