Installation guide

QuadroM32x/8L/26x/12Li/26xi Manual II: Administrator's Guide Administrator’s Menus
QuadroM32x/8L/26x/12Li/26xi; (SW Version 5.3.x)
27
The System Events table is the list of new and read system
events. System events have corresponding coloring depending
on the nature of the event: success (priority 1, color green), low
importance failure (priority 2, color yellow), critical failure (priority
3, color red).
The table shows the Status of the event (new or read) as well as
the name of the application the event refers to, event description,
and the date when the event was received. For example, if the
event was caused by the IDS service, the Check IDS link
appears in the reference row that will lead to the
IDS Log page, or
if the event has occurred due to incorrect mail sending or SIP
registration, the corresponding links will be seen in the Reference
column of the table. The administrator can view the detailed log
for each event that has occurred.
The System Events page offers the following components
:
Current System Time displays the local date and time on
Quadro.
Mark all as read marks newly occurred events as “read”.
Reset LED switches off the flashing LED (if applicable) on the
board. An LED notification may appear (depending on the
notification type given) in the page
Events page when a new
event occurs.
Fig. II-46: System Events list