Installation guide

QuadroM32x/8L/26x/12Li/26xi Manual II: Administrator's Guide Administrator’s Menus
QuadroM32x/8L/26x/12Li/26xi; (SW Version 5.3.x)
25
The Automatically Backup Configuration Settings page
allows you to enable the automatic backup of the system
configuration and the voice data on the Quadro. With this
service, Quadro will automatically backup the system
configuration and the voice data and store it in the specified
location.
This page contains the following components:
The Enable Automatically Backup
checkbox enables
automatic backup mechanism on the Quadro.
The following group of manipulation radio buttons allows you
to select wheth
er the backup files will be delivered by email or
stored in some location:
• The Send via Email radio button is used to send the
automatically backed up files via email. The selection
enables Email Address text field that requires the email
address of the administrating person to receive the
automatically backup files.
• The Send to Server radio button is used to store the
automatically backup files on a remote server. This
selection enables the following fields to be inserted:
Fig. II-42
:
Configuration Management page
The Server Name requires the IP address or the host name of the remote server.
The Server Port requires the port number of the remote server.
The Path on Server requires the path on the server to store the backup files in.
The Send Method manipulation radio buttons allow you to select the remote server type: TFTP or FTP. In case of FTP selection, the
authentication username and the password need to be inserted. In case these fields are left empty, anonymous authentication will be used.
The Backup Interval Selection drop down lists is used to select the frequency and the time when the automatic backup of the Quadro's system
configuration and the voice data will take place.
Backup Now button is used to perform a manually immediate backup of the system configuration and the voice data.
The Backup & Download all config & voice data link generates a backup file with all configuration settings and user uploaded greeting messages.
It opens a file chooser window for immediate download to the users PC.
The Upload & Restore all config & voice data link opens a page that has a Browse button, (which opens a file chooser to select a backed-up file)
and a Configuration to Upload field requiring the file path to upload and to restore it immediately. Pressing Save will restore the selected backup
file, and delete all current user defined greetings and replace configuration settings.
The Restore Default Configuration functional button resets all configuration settings and restores the board’s factory default configuration. By
restoring the default configuration you will replace your current configuration, lose all voice mails and reboot the device. You will not be automatically
redirected to the GUI start page. After the successful reboot you will need to enter into the management page and login again to access the Quadro’s
configuration. A warning message will ask you to confirm your selection before restoring the default configuration.
Please Note: Unlike the factory default settings restore procedure initialized from the Reset button on the Quadro board, this link will keep the
following data:
• Call Statistics
• Transfer Statistics
• System Events
• Feature Keys
• Device Registration state
The Download current configuration in a legible format and Upload a legible configuration file links leads you to the
Legible Configuration
Management page where legible configuration can be downloaded and uploaded back after the required edits.
Legible Configuration Management
The Legible Configuration Management is used to manually manage the configuration on the Quadro. This will allow you to download a piece of
configuration from the Quadro in the way of legible file, to make necessary changes in that file and to upload it back to the same or different
Quadro(s). With this service, some pieces of configuration (like extension settings, NAT settings, etc.) of one Quadro can be used on another
Quadro. This also helps to apply the same group of settings to the several instances (for example, to apply the same SIP settings to multiple
extensions on the Quadro) on the same or different Quadros avoiding manual configuration of each of those instances (i.e. extension) from the web
management on each of the Quadros. The Quadro reseller, distributor, ISP or carrier usually uses this service.
The Download current configuration in a legible format link refers to the Configuration Summary page where a partial or complete
configuration can be defined and downloaded or viewed.
The Configuration Summary page is used to generate a piece of legible configuration and to download it to a PC or to view it directly in the
browser. This page consists of the following components: