Installation guide

QuadroM32x/8L/26x/12Li/26xi Manual II: Administrator's Guide Administrator’s Menus
QuadroM32x/8L/26x/12Li/26xi; (SW Version 5.3.x)
22
SIP Registration Status
The SIP Registration Status is a table displaying the SIP registration
information of the Quadro extensions.
The table contains a list of all the registered extensions of the Quadro,
SIP registration name for each extension, addresses of SIP servers
where they are registered (if applicable), whether or not it is registered
for each extension, and the registration date and time. By clicking on
the row heading, the table will be sorted by the selected column. When
sorting (ascending or descending), arrows will be displayed next to the
column heading.
The links inside the table will link you to the Extensions Management
page where the SIP registration settings may be altered.
The Detected Connection Type field displays the connection type
Quadro currently is acting in (direct connection or behind NAT). If
Quadro is acting behind NAT, the NAT machine IP address is also
displayed.
The Registered IP Lines table lists the IP lines and remote extensions
registered on the Quadro. The table indicates the actual IP addresses of
the remote devices, the usernames by which the devices have been
registered on the Quadro, as well as the registration status information.
The SIP Tunnels to Slave Devices and SIP Tunnels to Master
Devices tables list the SIP tunnels between local and the remote
Quadros (see
SIP Tunnel Settings). The SIP Tunnels to Slave
Devices table lists those tunnels where local Quadro acts as a master.
The SIP Tunnels to Master Devices table lists those tunnels where
local Quadro acts as a slave.
Fig. II-32: SIP Registration Status page
IP Lines Registration Status
The IP Lines Registration Status displays a table with the IP Lines
registration information on the Quadro.
The table lists the IP lines and remote extensions registered on the
Quadro. The table indicates the actual IP addresses of the remote
devices, the usernames by which the devices have been registered on
the Quadro, as well as the registration status information.
Subscription Count field indicates used and allowed number of
subscriptions for all IP phones registered on the Quadro. Subscriptions
are events originated by IP phones when watching other extensions or
SLAs on the Quadro and when monitoring voice mailbox for new
received voice mails.
Fig. II-33: SIP Registration Status page
When the allowed number of subscriptions is reached, no new subscriptions are possible. Typically the number of subscription should be keep
reasonably below the maximum allowed number, to avoid losing subscriptions. Thus, in case the actual subscription number is close to the limit,
configuration of IP phones should be adjusted to decrease the number of total subscriptions on the Quadro.
Used Subscription Distribution field indicates IP phone's subscriptions distribution among BLF (Busy Lamp Field) subscriptions, which are used
for watching extensions on IP phones, and MWI (Message Waiting Indication) subscriptions, which are used for voice mailbox status indication on
the phone.
License Status
The License Status page displays a table with all available licenses on
the Quadro and the corresponding settings for each license. (Currently
only QCM, iQall and DCC license statuses are displayed.)
This page includes the following information:
Type indicates the type of the license available on the Quadro.
Count
indicates the number of the corresponding licenses available on
the Quadro.
In Use indicates the number of used licensed from the total available
licenses.
Extension lists the extensions that are using the corresponding license.
Links in this column move to the corresponding service configuration
page for the extension.
Fig. II-34: License Status page