Installation guide

QuadroM32x/8L/26x/12Li/26xi Manual II: Administrator's Guide Appendix: Moderator’s Menus
QuadroM32x/8L/26x/12Li/26xi; (SW Version 5.3.x)
192
New Participants Configuration
This page is used to configure settings of participants independently dialed in to the conference. Once the new participant connects the conference,
he will automatically appear in the
Conference Progress table and remain there unless disconnected from the conference.
Max New Participant Count text field requires
the maximum
number of new users allowed to connect to the conference. Leave
this field empty to allow unlimited number of new users connecting
the conference.
New Participant Type drop down list is used to select the state
(speaker or lis
tener only) of the new participants connected to the
conference.
Selecting the New Participant Can Make Video Call checkbox will
allow participant to join the video conference.
New Participant Confirmation Type drop down list is used to select
whether the conference is password protected for the new users or
not.
Selecting the New Participant Can Activate Conference checkbox
will allow new users to activate the conference.
When Conference Inactive Until Moderator Login option is
enabled, participants will not be able to join the conference until the
moderator has logged in. New Participant Confirmation Type field
should also be set to Password to enable this option.
Selecting the New Participant Indication checkbox will enable a
beep indication during the active conference when a new user joins
or leaves the conference.
Fig. II-15: New Participants Configuration Page
Handset Added Participants Configuration
This page is used to configure the settings of participants dialed out from the handset by the moderator during the active conference. Once the
handset added participant connects the conference, he will automatically appear in the
Conference Progress table and remain there unless the
conference is terminated. This will allow the handset dialed participant to hang up and dial in to the corresponding conference again while it is active.
The page consists of the following components:
Participant Type drop down list is used to select the state (speaker
or listener only) of the handset added participants connected to the
conference.
Confirmation Type drop down list is used to select whether the
conference is password protected for the handset added users or
not. When Star (*) selection is chosen, the handset added user
should accept the conference invitation by pressing the * button.
Selecting the Allow Video checkbox will allow participant to join the
video conference.
Selecting the Participant Indication
checkbox will enable a beep
indication during the active conference when a handset added user
joins or leaves the conference.
The Allow Duplicated Participation checkbox selection allows
several instances of callers with the same handset added number
(caller address) to join the corresponding conference at the same
time. This option may be used to allow users from the same network
(with the same caller address), like PSTN network, to reach the
conference.
Fig. II-16: New Participants Configuration Page