Installation guide

QuadroM32x/8L/26x/12Li/26xi Manual II: Administrator's Guide Appendix: System Default Values
QuadroM32x/8L/26x/12Li/26xi; (SW Version 5.3.x)
182
Parameter System Default Value
No user defined services and IP pool groups.
DNS Server Settings
Time to live (TTL) – 86400 seconds,
Mail Exchange (MX) – undefined,
No aliases defined.
DHCP Advanced Settings
DHCP Options:
Gateways – 172.30.0.1
Subnet mask – 255.255.0.0
Domain name servers – 172.30.0.1
NBT name servers – 0.0.0.0
NTP servers – 172.30.0.1
Domain name – epygi-config.loc
Overload tftp server name – 172.30.01
DHCP Server Statements:
Authoritative – enabled.
Ping Check – enabled,
Ping timeout – 1 sec.
VLAN Settings Undefined.
Extension Settings
Parameter System Default Value
Voice Mail Settings
Maximal mail message duration - 5 min,
Ask password before granting local access to mail box – disabled,
Ask password before granting remote access to mail box – enabled,
Send welcome message – disabled,
Play Voice Mail help – enabled,
Automatically play messages - enabled,
Send mails count information message – disabled,
Send date/time information message – enabled,
Send beep at the end of message – enabled,
Silent VM recording – disabled,
Send new voice messages via e-mail – disabled,
Voice Mail-Send notification with attachment
Remove Voice Mail On Send-disabled
Fax- Send notification with attachment
Remove Fax On Send-disabled
Send new voice message notifications via SMS – disabled,
Send new voice message notifications via phone call – disabled,
Voice Mail Indication:
Lamp indication – enabled for IP lines only,
Tone indication - enabled for FXS lines only,
Ringing indication – disabled,
Zero Out – enabled, Redirect Call Type – PBX, Redirect Address - 00,
FAX Redirection – disabled,
Automatic Fax Receiving Mode – disabled,
Out of Office – disabled,
Forward/rewind duration – 3 seconds,
Greeting message – default,
VM Profiles – undefined.
Group List No entries.
Speed Calling No entries.
Account Settings
Display Name – undefined,
User Password Protection – disabled both for incoming and outgoing calls,
User’s Name for Extensions Directory – default,
Custom Voice Messages – default.