Installation guide

QuadroM32x/8L/26x/12Li/26xi Manual II: Administrator's Guide Appendix: System Default Values
QuadroM32x/8L/26x/12Li/26xi; (SW Version 5.3.x)
178
Parameter System Default Value
Attendant 00 Settings – Attendant
Scenario
Scenario – default,
Send AA digits to Routing Table – disabled,
Redirection on Timeout – disabled,
ZeroOut – disabled,
Welcome Message – enabled,
Ringing Announcement – disabled,
Welcome Message, Recurring Attendant Prompt and Attendant Ringing
Announcement – default.
Attendant 00 Settings – SIP
Registration username – 00,
Registration password - empty,
SIP server - empty,
SIP Server port – 5060,
SIP Server Registration – disabled.
Attendant 00 Settings – SIP
Advanced
Same as for extensions.
Attendant 00 Settings - Codecs
Codecs - G711u (preferred), G711a, G726/16, G726/24, G726/32, G726/40, G729a,
iLBC – enabled,
H.263, H263+ and H.264 – disabled,
Out of Band DTMF Transport – enabled,
T.38 FAX – enabled,
Pass Through FAX – enabled,
Pass Through Modem – disabled,
Force Self Codecs Preference for Inbound Calls – disabled,
SRTP Policy – Accept anything.
Universal Extension Recordings Default, Percentage of System Memory – 1%.
Receptionist Management No entries.
Extension Directory
No entries.
Authorized Phones Database
No entries.
ACD Management
Undefined.
Conference Management and Mail
Default Settings
Feature is disabled by default.
Conference Statistics
Enable Call Reporting– enabled,100 entries for all type of calls.
Call Statistics
Enable Call Reporting– enabled, 100 entries for all type of calls.
Percentage of Total Memory used for Archive – 0%
Enable Call Statistics Archive Collection – disabled
Call Statistics Archive Structure – Archive by records count
Call Records Count – 50
Time Interval – 10min
Send archive files to external server – Send and delete from archive
File Format –Tab Delimited Text (.log)
SIP Settings
UDP and TCP Port – 5060,
TLS Port-empty
Realm – quadro,
Session Timer – disabled,
DNS Server for SIP – default,
SIP timers – RFC 3261,
Host Aliases for SIP – undefined.
RTP Settings
Properties for all Codecs except iLBC, G.722, G.722.1, TDVC :
Packetization -20ms
Silence Suppression -yes
iLBC properties:
Packetization - 30ms
Silence Suppression – yes
G.722, G.722.1, TDVC properties-undefined,
G.726 Standard - ITU-T specification
RTP/RTCP port range - 6000-6255
RTCP Support - disabled
NAT Traversal Settings
NAT Traversal for SIP – Automatic
SIP and RTP Parameters - Use STUN