Installation guide

QuadroM32x/8L/26x/12Li/26xi Manual II: Administrator's Guide Appendix: System Default Values
QuadroM32x/8L/26x/12Li/26xi; (SW Version 5.3.x)
177
Parameter System Default Value
Pass Through Modem – disabled,
Force Self Codecs Preference for Inbound Calls – disabled,
SRTP Policy – Make unsecure calls, accept anything.
For extensions 103-198:
Codecs - G711u (preferred), G711a, G729a – enabled,
G726/16, G726/24, G726/32, G726/40, iLBC, G.722, G.722.1, TDVC, H.263,
H.263+ and H.264 – disabled,
Out of Band DTMF Transport – enabled,
T.38 FAX – enabled,
Pass Through FAX – enabled,
Pass Through Modem – disabled,
Force Self Codecs Preference for Inbound Calls – disabled,
SRTP Policy – Make unsecure calls, accept anything.
Extension Settings – Codecs
(for QuadroM26x/26xi)
For extensions 101-126:
Codecs - G711u (preferred), G711a, G729a, G726/32, G726/16, G726/24,
G726/40– enabled,
iLBC, G.722, G.722.1, H.263, H.263+ and H.264 – disabled,
Out of Band DTMF Transport – enabled,
T.38 FAX – enabled,
Pass Through FAX – enabled,
Pass Through Modem – disabled,
Force Self Codecs Preference for Inbound Calls – disabled,
SRTP Policy – Make unsecure calls, accept anything.
For extensions 127-206:
Codecs - G711u (preferred), G711a, G729a – enabled,
G726/16, G726/24, G726/32, G726/40, iLBC, G.722, G.722.1, TDVC, H.263,
H.263+ and H.264 – disabled,
Out of Band DTMF Transport – enabled,
T.38 FAX – enabled,
Pass Through FAX – enabled,
Pass Through Modem – disabled,
Force Self Codecs Preference for Inbound Calls – disabled,
SRTP Policy – Make unsecure calls, accept anything.
Extension Settings – Codecs
(for QuadroM32x)
For extensions 101 and 102:
Codecs - G711u (preferred), G711a, G729a, G726/32, G726/16, G726/24,
G726/40– enabled,
iLBC, G.722, G.722.1, H.263, H.263+ and H.264 – disabled,
Out of Band DTMF Transport – enabled,
T.38 FAX – enabled,
Pass Through FAX – enabled,
Pass Through Modem – disabled,
Force Self Codecs Preference for Inbound Calls – disabled,
SRTP Policy – Make unsecure calls, accept anything.
For extensions 103-294:
Codecs - G711u (preferred), G711a, G729a – enabled,
G726/16, G726/24, G726/32, G726/40, iLBC, G.722, G.722.1, TDVC, H.263,
H.263+ and H.264 – disabled,
Out of Band DTMF Transport – enabled,
T.38 FAX – enabled,
Pass Through FAX – enabled,
Pass Through Modem – disabled,
Force Self Codecs Preference for Inbound Calls – disabled,
SRTP Policy – Make unsecure calls, accept anything.
Attendant 00 Settings – General
Display name – Attendant,
FAX forwarding – disabled,
Show on Public Directory – enabled,
Percentage of System Memory – 5%.