Installation guide
QuadroM32x/8L/26x/12Li/26xi Manual II: Administrator's Guide  Appendix: System Default Values 
QuadroM32x/8L/26x/12Li/26xi; (SW Version 5.3.x)       
174 
Appendix: System Default Values  
Administrator Settings 
Parameter  System Default Value 
Admin Settings 
Login name -admin 
Password – 19 
Quadro Hostname  quadrom 
Quadro Domain Name  epygi-config.loc 
LAN IP Address 
172.30.0.1 
Subnet Mask - 255.255.0.0 
DHCP Server  Disabled 
Regional Settings and Preferences 
Locale – US, 
TimeZone – Central Time (US&Canada), 
Theme – Dynamo, 
Choose Theme on Login – disabled. 
Emergency and PSTN codes 
Emergency Code – 911, 
PSTN Access Code - 9. 
WAN Interface Protocol  Ethernet 
WAN Interface Bandwidth 
Upstream – 100000, 
Downstream – 100000, 
Min Data Rate – 0. 
WAN IP  Assign automatically via DHCP 
MAC Address  
Assigned by device 
MTU - 1500 Bytes. 
DNS Server  Dynamically by provider 
System Security Management 
Security Level-Medium 
SIP IDS Settings 
Enable SIP IDS – enabled 
Add the IP address into the Blocked IP list in Firewall – enabled 
Discard SIP messages from IP address – enabled. 
IP Routing Configuration  
No Routes 
Configuration Management 
Automatically Backup Configuration – disabled. 
Event Settings 
”Display notification” for all events except Login and Firmware Update events. Those 
events have a “Do nothing” action assigned. Additionally, Fan Control critical and 
major failures have a Flash LED action assigned. 
Time/Date Settings 
Simple Network Time Protocol Server and Client – enabled, 
SNTP Server – ntp1.epygi.com, 
Polling interval – 6. 
Mail Settings 
System Mail Settings-disabled, 
SSL– disabled , 
Enable SMTP Authentication-disabled,  
User Name-empty,   
User Password-empty   
SMS Settings  Enable SMS Service-disabled 
Automatic Firmware Update 
Enabled. 
Server Configuration – Assign manually, 
Server Name – ftp.epygi.com, 
Server Port – 21, 
Update Method – ftp, 
Username – anonymous, 
Password – empty, 
Check and notify – Every day at 0:00. 
SNMP Settings  SNMP – disabled. 
System Logs Settings 
User Logging – enabled, 
Developer Logging – enabled, 
Log Lines to Show – 25, 










