Installation guide
QuadroM32x/8L/26x/12Li/26xi Manual II: Administrator's Guide  Administrator’s Menus 
QuadroM32x/8L/26x/12Li/26xi; (SW Version 5.3.x)       
161 
Network Menu 
Fig. II-276: Network menu in Dynamo theme 
 Fig. II-277: Network menu in Plain theme 
DNS Settings 
The  DNS  Settings  page provides the option of setting up a name 
server for the Quadro. It offers the following components: 
The Nameserver Assignment radio buttons are as follows: 
• The  Dynamically by provider 
selection automatically 
configures the assignment of the name server address from the 
provider party. 
• Fixed Nameserver address  is a manually selected name 
server. The Nameserver text field requires the IP address of an 
external name server. The Alternative Nameserver  text field 
requires the IP address of the secondary name server. The 
Alternative Nameserver  is used if the main name server 
cannot be accessed. 
Fig. II-278: DNS Settings page 
DNS Server Settings 
The DNS Server on the Quadro provides the services to the hosts in the Quadro’s LAN. With this service, Quadro returns the correct IP address to 
the requested domain name, so that any device in the LAN can be accessed by its hostname or alternative alias name. 
The DNS Server Settings page is used to configure DNS server settings on the Quadro and to define a list of aliases for the devices in the Quadro’s 
LAN. This page contains the following components: 
Zone field displays the Quadro’s host domain name as it is 
configured in the 
System Configuration Wizard. 
Time to live (TTL) text field indicates the time (in seconds) 
during which the DNS server will keep the resolved names in its 
cache. During this time the same address will be resolved from 
the cache of the DNS server. When this timeout expires, the 
requested address will be resolved newly. 
Mail Exchange (MX) text field indicates the mail server’s 
hostname. When resolving the email address, the reference will 
go to the mail server defined in this field, before being sent out 
to the external network. The value in this field will be used in the 
MX record in the DNS server on the Quadro. 
The table on this page lists aliases for each of the device in the 
Quadro’s LAN to be resolves through the DNS server. 
Fig. II-279: DNS Server Settings page 










