Installation guide

QuadroM32x/8L/26x/12Li/26xi Manual II: Administrator's Guide Administrator’s Menus
QuadroM32x/8L/26x/12Li/26xi; (SW Version 5.3.x)
141
1. Registration Settings
The Primary Server requires the IP address of the primary Radius
Server.
The Secondary Server requires the IP address of the secondary
Radius Server.
NAT Station IP text fields require the NAT PC WAN IP address. If
no NAT Station is specified here, Quadro’s IP address will be sent
to the RADIUS server.
Secret Key is used to insert the secret key between the Radius
client and the server. Contact the Radius server administrator to
get the secret key for your Quadro.
The Confirm Secret Key field is used to verify the secret key. If
the entered Secret Key
does not correspond to the one in the
Confirm Secret Key field, the error message “The Secret Key
does not match. Please try again” will appear.
Retry Count allows you to select the number of attempts
authorized before canceling the registration.
Receive Timeout allows you to select the timeout (in seconds)
between two attempts to register.
Encoding Type allows you to select the encoding type (PAP or
CHAP) that should be unique on both the client and the server
sides for the establishment of a successful connection. Encoding
type should also be requested from the Radius Server
administrator.
The Authorization Port text field requires the port number on the
RADIUS server where Quadro is to send the authentication
requests.
The Accounting Port text field requires the port number on the
RADIUS server where Quadro is to send the accounting
messages.
Fig. II-235: Radius Client Settings page
2. Authentication Settings
The Enable common login for all users in time of by Phone authentication checkbox enables custom settings for the callers who passed an
authorization by phone on the Quadro. This checkbox enables Username and Password text fields to insert the custom settings that will stand
instead of the source caller’s settings when being delivered to the RADIUS server.
The Authentication on Destination RADIUS Server parameters group is used to insert a Username and a Password (followed by the password
confirmation) to pass authentication on the RADIUS Server of the destination Quadro. If these fields are left empty, the original authentication
settings that users enter for authentication will be used.
3. Accounting Settings
The Username field is dedicated for accounting services only. It is used to insert an identification username for accounting purposes. When no
username is specified in this field, the source username will be used for accounting.
The Send Accounting messages manipulation radio buttons group is used to select sending both Start and Stop accounting messages or only
Stop accounting message.
Voice Mail Common Settings
The Voice Mail Recording Codec page is used to configure the codec for the Voice Mail recording and other settings related to the voicemail to
email and FAX to email sending. It offers the following components:
The Recording Codec drop down list contains the existing
codecs for voice mail compression. Changing the Voice Mail
recording codec will directly affect the allocated memory size
for users.
Email Subject for voice field is used to when user enables
Send new voice messages via e-mail option from his
personal Voice Mail Settings
. In this field you may define a
flexible subject for all emails sent from the Quadro and
carrying the voice mails.
Besides using static text in the subject line, you may want to
use the predefined tags to combine the needed subject:
Fig. II-236: Voice Mail Recording Codec page
• Hostname - the hostname of the Quadro.
• Displayname - the caller's display name. This value is not displayed for PSTN callers.
• Username - the caller's SIP username. For PBX caller this is the caller's PBX number, for PSTN callers this is the caller's PSTN number.