Installation guide

QuadroM32x/8L/26x/12Li/26xi Manual II: Administrator's Guide Administrator’s Menus
QuadroM32x/8L/26x/12Li/26xi; (SW Version 5.3.x)
134
The caller passes authorization automatically if the detected phone
number of the caller dialing a route has the AAA option enabled and is
registered in the Local AAA Table. If the caller ID service is disabled
or the caller’s phone number is not registered, the caller is asked to
enter a registration user name and password.
The Add functional button opens the Call Routing – Local AAA Table
- Add Entry page where a new local AAA record can be created.
The Call Routing – Local AAA Table - Add Entry page offers a
group of manipulation radio buttons to select the type of authorization
and the following other parameters:
Fig. II-229: Local AAA Table page
• Authentication by Caller ID – this selection is used to set the
authentication based on the caller’s phone number (which is
considered to be automatically detected). The Phone
Number/SIP User Name
text field requires the caller’s phone
number or the SIP username. Only numeric and wildcard
characters (see chapter Entering SIP Addresses Correctly) are
allowed for this field. '[' , ']' , ',', '-', ‘{‘, ‘}’ are used to define a range
or a quantity of numbers. For example, 2{13-17, ww, a-c} means
that the dialed number may be 213, 214, 215, 216, or 217, 2ww,
2a, 2b and 2c to match the specified phone number; in the case
of 2[3,7], the dialed number may be 23 or 27 to match the
specified phone number. The {11, 15, 23, 38, 45} pattern means
that the dialed number may be 11, 15, 23, 38 or 45 to match the
pattern.
Fig. II-230: Local AAA Table - Add Entry page
• Authentication by Login – this selection is used to set the authentication based on the username and password inserted by the user upon
login. The Username text field requires the authentication username. Only numeric values are allowed for this field, otherwise the error
message “Incorrect Username - digits allowed only” will appear. The Password text field requires the authentication password. Only numeric
values are allowed for this field, otherwise the error message “Incorrect Password - digits allowed only” will appear.
• Authentication by PIN- this selection is used to set the authentication based on the PIN inserted by the user upon login. Only digit values are
allowed for this field, otherwise the appropriate error message will be displayed.
The Expiration Date and Time drop down-lists are used to set the date and time when the registration will expire.
The Expires in checkbox is used to enable the Expiration Date and Time feature.
The Description text field requires an optional description about the calling party.
Edit opens the Edit Entry page to modify the local AAA entry.
Delete removes the selected local AAA entry from the Local AAA Table.
Select all selects all records of the table.
Inverse selection inverses the current selection (if no records are selected, clicking on inverse selection will check all records).
Global Speed Dial Directory
The Global Speed Dial Directory link leads to the page where
global speed dialing rules may be uploaded in a file. With this
service, you may define multiple speed dial rules, write and save
them in a file and then upload all of them at once.
To compose the configuration file, any text editor can be used
which may produce files compatible to the CSV format: the speed
dial code and destination should be separated by commas. There
should be a line break after each code defined.
The View/Download Speed Dial Directory and Remove Speed
Dial Directory
links appear only if a global speed dial configuration
file is uploaded previously.
Fig. II-231: Global Speed Dial Directory page
The View/Download Speed Dial Directory link is used to download the configuration file to the PC and opens the file-chooser window where the
saving location may be specified. The Remove Speed Dial Directory link is used to restore the default configuration.
The speed dial configuration file downloaded from the Quadro is in the CSV format.