Installation guide

QuadroM32x/8L/26x/12Li/26xi Manual II: Administrator's Guide Administrator’s Menus
QuadroM32x/8L/26x/12Li/26xi; (SW Version 5.3.x)
132
where the caller is registered, or the caller’s device if they are direct calls, separated by a space. In case of FXO, ISDN or E1/T1 source types
selected, Source Port ID drop down list will require to select the FXO line number or ISDN / E1/T1 Trunk correspondingly, and on the next step, a list
of timeslot(s) used to receive calls from the defined caller.
The Call Routing Wizard Date/Time Rules - Add Entry page appears if the Set Date / Time Period(s) checkbox previously had been enabled on
Page 1 of the Local Call Routing Wizard. It will require information about the pattern validity period(s).
This page provides selection between Typical and Custom date/time
rule definitions.
The Typical selection contains the following group of radio buttons that
are used to select the frequency of the corresponding routing pattern
that is to take place:
Daily
Weekly the preferred weekday(s) should be selected for this
option.
Monthlythe calendar day should be selected for this option.
Annually the calendar day and month should be selected for
this option.
In the Available Time Period drop down lists, the time range of the
pattern validation should be defined. Any time selected in this field will
be considered corresponding to the Quadro’s
Time/Date Settings.
The Custom selection provides the option to manually define the
validity period(s). Use the following format to insert pattern date/time
rule(s):
[Month,Month-Month,...][Day-Day,Day,...][hh:mm-hh:mm,...]; ...
Fig. II-225: Call Routing Wizard Date/Time Rules Add Entry page
The Call Routing WizardRouting Overall Call Limitation Settings
- Edit Entry page appears if the Set Calling Time Limit checkbox
previously had been enabled on Page 1 and allows to define the
available duration of the calls with the selected routing rule as well as
to specify the Expiration/Renewal Date for t
he available calls
duration.
The Routing Overall Call Limitation Settings - Edit Entry page
consists of the following components:
The Available Calls Duration text field requires the maximum
available duration of the calls
(in minutes) placed with the
selected routing rule. Once the
Available Calls
Duration reaches the value defined here, the current call will be
disconnected without prior notice and no new call will be
possible until this field is updated.
The Expiration/Renewal Date settings are used to configure
the Expiration Date and Renewal Amount of the Available
Calls Duration. Expiration/Renewal Date
field provides
selection between Periodic and Specific Date.
o The Periodic selection is used to define the expiration
date of the allocated Available Calls Duration for the
selected routing rule and has the following options:
Daily
Weekly- the preferred week start day should
be selected for this option.
Monthly - the calendar day should be selected
for this option.
Fig. II-226: Call Routing Wizard Routing Call Limitation Settings - Edit Entry page
o The Renewal Amount text field requires the renewal amount (in minutes) to be added to the Available Calls Duration when the
expiration date of the Available Calls Duration is reached.
o The Discard remainder before renewal option selection allows to discard the remainder of Available Calls Duration before
renewal and set the Renewal Amount as an available calls duration.
o The Specific Date selection provides a possibility to manually define the expiration date allocated for the Available Calls
Duration for the selected routing rule. When the Specific Date expires, the selected routing rule becomes unavailable automatically
and no new call will be possible until this field is updated.