Installation guide

QuadroM32x/8L/26x/12Li/26xi Manual II: Administrator's Guide Administrator’s Menus
QuadroM32x/8L/26x/12Li/26xi; (SW Version 5.3.x)
129
The Set Overall Calling Time Limit checkbox selection allows a total call duration for all calls to be configured over a specific time frame for each
Call Routing entry. Once the total duration has been reached, the entry can be disabled, allowing calls to use the next available route.
If this checkbox is not selected in the Call Routing Wizard first page, the overall call duration will be unlimited. When this checkbox is selected, Call
Routing Wizard - Routing Overall Call Limitation Settings page will be displayed.
Please Note: The Overall Calling Time Limitation checkbox is not allowed for PBX, PBX-Voicemail and PBX-Intercom destination types routing
rules.
Set Tracing / Debug Options on This Rule checkbox is used to switch events notification on the certain execution results of the corresponding
routing rule. When this checkbox is enabled, the Call Routing Wizard - Tracing/Debug Options page will be displayed.
Require Authorization for Enabling/Disabling checkbox is used to enable administrator’s password authentication when enabler/disabler keys are
configured for the routing rule. The service can be used locally from the handset (see Feature Codes in Manual III - Extension Users Guide) or
remotely from Auto Attendant (see Auto Attendant Services in Manual III - Extension Users Guide). When this checkbox is selected, administrator’s
password will be requested to enable/disable the certain routing rule(s). If the administrator’s password has been inserted incorrectly for 3 times, no
status changes will be applied to any of the routing record(s), even to those which have no authorization enabled.
Enabler Key and Disabler Key text fields request digit combination which should be dialed from the handset or Auto Attendant to enable or disable
the certain routing rules in the Call Routing Table. You can set the same Enabler/Disabler Key for multiple routing rules (the same key may be used
as enabler for one routing rule, and as disabler for another one) - this will allow managing several routing rules with the single key.
The second page of the Call Routing Wizard offers different
components depending on the Destination Type selected on
the previous page.
Use Extension Settings drop down list is applicable to SIP and
IP-PSTN destination types and allows you to select the
extension (also Auto Attendant) on behalf of the call that will be
placed. The SIP settings of the selected extension will be used
as the caller information. If an entry is not selected from this list,
the original caller information will be kept. When Keep original
DID
checkbox is selected, the called destination will receive the
original caller’s information and not the information of the
extension selected from the Use Extension Settings list.
When the checkbox Add Remote Party ID
is selected, the
Remote-Party-
ID parameter is being delivered to the destination
side upon call establishment procedure.
SIP Tunnel drop-down list appears only when the “SIP_Tunnel”
Destination Type is selected on the previous page. The list is
used to select the particular SIP tunnel to route the calls through
the corresponding Quadro.
Fig. II-223: Call Routing Wizard - page 2
Destination Host requires the IP address or the host name of the destination (for a direct call) or the SIP server (for calls through the SIP server).
This field is named Modified Destination Host if the Pattern field on the first page of this wizard contains “@” symbol.
Destination Port requires the port number of the destination or of the SIP server. This field is named Modified Destination Port if the Pattern field
on the first page of this wizard contains “@” symbol.
User Name and Password require the identification settings for the public SIP server or servers requiring authentication.
Enable Activity Timeout checkbox is used to limit time-to-live period of routing pattern (makes sense if accept or failure feedback arrives too late
from the destination).
Checkbox selection enables the Activity Timeout text field which is used to insert a routing pattern activity timeout (in the range from 1 to 180
seconds). When timeout is configured, the routing pattern will be active within the defined time frame and if no response has been received from the
destination during that period, the pattern will be stopped and next routing rule might be optionally considered (depending on the Fail Reason
configuration on the corresponding pattern).
The Restrict the Number of Simultaneous Calls checkbox is only available for IP-PSTN destination type and is used to restrict the number of
simultaneous calls to the public SIP server with the same username at the same time. This checkbox enables Allowed Call Count text field which
requires the number of simultaneous calls allowed in a range from 1 to 64. If you leave this field empty, no limitation will apply to the number of
simultaneous logons.
The Use RTP Proxy checkbox is available for SIP and IP-PSTN destination types and is applicable when a route is used for calls through Quadro
between peers that are both located outside the Quadro. When this checkbox is selected, RTP streams between external users will be routed
through Quadro. When the checkbox is not selected, RTP packets will move directly between peers.
The Collect Call checkbox is available only for E1/T1 destination type and is used when it is simply preferable for the called phone to pay for the
call. This service is applicabe only if the Collect Call checkbox is enabled on both calling and called party's IP PBXs.