Installation guide
QuadroM32x/8L/26x/12Li/26xi Manual II: Administrator's Guide Administrator’s Menus
QuadroM32x/8L/26x/12Li/26xi; (SW Version 5.3.x)
12
Required Bandwidth for Standard Packets:
Packet
Size in
msec.
Needed bandwidth in kbit/s using the Codecs:
G.711u/G.711
a
G.726-16 G.726-24 G.726-32 G.726-40 G.729a
iLBC-
13.33
G.722 G.722.1
10 105 58 66 74 82 50 - 105 74
20
84
37
45
53
61
29
-
84
53
30
76
30
38
45
53
22
27
76
45
40
74
27
34
42
50
19
-
74
42
50
71
25
32
40
48
17
-
71
40
60
67
22
30
37
45
15
20
67
37
Needed Bandwidth for Encrypted Packets when using a SRTP:
Packet
Size in
msec.
Needed bandwidth in kbit/s using the Codecs:
G.711u/G.711a
G.726-16 G.726-24 G.726-32 G.726-40 G.729a
iLBC-
13.33
G.722 G.722.1
10
114
66
74
82
90
58
-
114
82
20
89
41
49
57
65
33
-
89
57
30
81
33
41
49
57
26
31
81
49
40
76
28
36
44
52
20
-
76
44
50
74
26
34
42
50
18
-
74
42
60
72
24
32
40
48
16
22
72
40
Required Bandwidth for Encrypted Packets when a VPN is used:
Packet
Size in
msec.
Needed bandwidth in kbit/s using the Codecs:
G.711u/G.711a
G.726-16 G.726-24 G.726-32 G.726-40 G.729a
iLBC-
13.33
G.722 G.722.1
10
148
98
105
118
124
92
-
148
118
20 105 59 65 74 81 49 - 105 74
30
90
43
52
60
66
35
41
90
60
40
85
38
45
53
61
30
-
85
53
50
80
34
41
48
56
26
-
80
48
60
74
29
37
45
52
22
26
74
45
System Security Management
The System Security Management offers a possibility of managing the global security levels, running the system security diagnostics program and
receiving complete reports on the QuadroM configuration security. It includes three pages- the System Security Settings page, System Security
Diagnostics page and the SIP IDS Settings page.
The System Security Settings page includes the following
components:
The Security Level table - allows selecting the Security Level
defining requirements to the IP Lines' password strength and
the Security Report granularity. The security levels are as
follows:
• Low - There are no specific restrictions on the strength
of the saved password. Only the critical warnings on the
Call Routing Rules to PSTN and IP-
PSTN, disabled
Firewall and IDS will be generated in Security Report.
• Medium -
The minimum strength of the IP Line
passwords should be "good". The Security Report will
generate warnings on all unsecured Call Routing rules,
IP Line passwords, Firewall level (if it is set to lower than
"Medium") and disabled IDS.
• High - The minimum strength of the IP Line passwords
should be "strong". The Security Report will generate
warnings on the IP Line passwords, disabled IDS,
unsecured SIP, and unsecured Routing Rules to SIP,
PSTN and IP-PSTN and also regarding the Firewall level
if it is set to lower than "High".
Fig. II-12: QuadroM System Security Management page