Installation guide

QuadroM32x/8L/26x/12Li/26xi Manual II: Administrator's Guide Administrator’s Menus
QuadroM32x/8L/26x/12Li/26xi; (SW Version 5.3.x)
113
Group B Support manipulation radio button group is present only when R2 signaling selected from Signaling Type drop down list on the previous
page is different from R2 DTMF and is used to enable/disable the Group B Support. The Group B Support manipulation radio button group offers
following selections:
• Enable – this selection enables Group B Support
both for answer and busy recognitions of transmit
and receive signals. This selection requires you to
define transmit and receive signals. The Transmit
Answer Signal and Transmit
Busy Signal
parameters are defined from the drop down lists on
this page. When transmit signals are selected,
press Next on this page to access the R2 Receive
Signal Settings page where Receive Answer
Signal and Receive Busy Signal
should be
defined. Use the checkboxes to select the Receive
Answer Signal and Receive Busy Signal values.
Multiple values are allowed for each signal.
Please Note: Warning appears if you have
selected the same signal type both for receive
answer and receive busy recognitions.
• Partial Enable – selection partially enables Group
B Support with for answer recognition only. This
selection requires you to define transmit and
receive signals. The Transmit Answer Signal
parameter is defined from the drop down list on this
page. When transmit signal is selected, press Next
on this page to access the R2 Receive Signal
Settings page where Receive Answer Signal
should be defined. Use the checkboxes to select
the Receive Answer Signal value. Multiple values
are allowed for each signal.
• Disable – selection disables Group B Support and
requires defining the
Answer Signal
parameter.
Fig. II-198: CAS Signaling Wizard – Receive Signal Settings page
The Trunk CCS Signaling Settings page allows configuring CCS signaling settings and gives a possibility to select timeslots for signaling data
transfer/receive and voice transfer. The page consists of the following components: