Installation guide

QuadroM32x/8L/26x/12Li/26xi Manual II: Administrator's Guide Administrator’s Menus
QuadroM32x/8L/26x/12Li/26xi; (SW Version 5.3.x)
104
• Aastra 6730i (also supports FVC) • Yealink SIP-T38G
• Aastra 6731i (also supports FVC) • Yealink SIP-T46G
• Aastra 6735i (also supports FVC) • Yealink VP530
•
Aastra 6737i (also supports FVC)
•
Yealink W52P
•
Aastra 6739i (also supports FVC)
• AudioCodes 310HD
•
Polycom SoundPoint IP 300SIP
• AudioCodes 320HD
• Polycom SoundPoint IP 330SIP
• Panasonic KX-UT136
•
Polycom SoundPoint IP 331SIP
•
Panasonic KX-UT123
• Polycom SoundPoint IP 335SIP • Panasonic KX-TGP550T04
• Polycom SoundPoint IP 450SIP • Alcatel Temporis IP200
• Polycom SoundPoint IP 501SIP • Alcatel Temporis IP600
• Polycom SoundPoint IP 550SIP • Alcatel Temporis IP800
• Akuvox SP-R53P
Programmable Keys Configuration
The Programmable Keys Configuration page is used to assign a function to the programmable keys of the IP phone. The design of this page
depends on the IP phone model. However, independently on the IP phone model, this page contains a number of the programmable keys and
Functionality drop down list assigned to each of them.
The following options are available in the Functionality
drop down list:
• Watch Ext. # - watch the extension on the
Quadro and a possibility to pickup the call
addressed to that extension.
• Park Answer Ext # (on the phone can be visible
as PkA Ext. #, PrkA Ext. #, PrkAn Ext. # or
PrkAns Ext. #) - watch the calls parked to the
corresponding extensions and a possibility to
retrieve the calls parked to that extension.
This list also contains a number of PBX services available
on the Quadro and accessible with the * key combination
(see Quadro's Feature Codes). When configured from this
page, the key combinations become transparent for the IP
phones too.
Fig. II-180: Programmable Keys Configuration page (the preview is individual for different IP phone model)
• Vmail - accesses the voice mailbox of the extension to which the receptionist IP line is attached to.
• DND - enables the Do Not Disturb service on the extension to which the receptionist IP line is attached to.
• CallFwd - accessed Forwarding Management of the extension to which the receptionist IP line is attached to.
• AutoReDI - auto redials the last dialed call.
• CallBack - calls back to the last caller.
• LineInfo - gets the IP line information from the Quadro.
• CallBlk - blocks the last caller.
• Record – records the call (in case if the manual call recording is allowed for the call, configured from Call Recording Settings).
• ACD Login/Logout – allows the corresponding ACD agent to login to all groups it is involved in, if previously logged in, to log out from
those groups. For details on ACD functionality, see
ACD Management.
Please Note: When saving changes on this page, the system asks for a confirmation to remotely reboot the IP phone. It is recommended to reboot
the IP phone after configuration changes on this page in order to make the new configuration effective on the IP phone.
Manage IP Phone Templates
The Manage IP Phone Templates page is used to create custom templates for the IP Phones. The templates contain a set of configuration settings
that are uploaded to the IP phone once it is registered on the Quadro. With the custom templates the most popular configuration settings may be
adjusted accordingly. The saved custom templates can be then configured from the Edit IP Line Settings page to be used on the particular IP
phone.