Installation guide

QuadroCS Manual II: Administrator's Guide Administrator's Menus
QuadroCS (SW Version 3.1.x) 48
Network Menu
Fig. II-81 Network Dynamo Menu Fig. II-82: Network Tree Menu
DNS Settings
The DNS Settings page gives the possibility to setup a name
server for the QuadroCS. It consists of the following
components:
NameserverAssignment radio buttons:
• Dynamically by provider automatically configures the
assignment of the name server address from the provider
party.
• Fixed Nameserver address - manually selected name
server. The Nameserver text field requires the IP
address of an external name server. The Alternative
Nameserver text field requires the IP address of the
secondary name server. The Alternative Nameserver is
used if the main name server cannot be accessed.
Fig. II-83: DNS Settings page
DHCP Settings for the LAN Interface
The DHCP Settings for the LAN Interface page gives the
possibility to enable a DHCP server and control the QuadroCS
user’s LAN settings. Thus QuadroCS LAN users will be
provided automatically with the following settings using the
configured parameters:
• IP addresses
• NTP (corresponds to the QuadroCS’s IP address)
• WINS server
• Nameserver (corresponds to the QuadroCS’s IP address)
• Domain name
The page DHCP Settings for the LAN Interface offers the
following input options:
Enable DHCP Server activates the DHCP server on
QuadroCS.
IP Address Range defines a range of IP addresses that will be
assigned to the QuadroCS’ss LAN users. The IP range must
be at least 6, otherwise the “Address Range too small” error
will prevent saving. The “Address Range too large” error occurs
if the IP range is greater than 254.
WINS Server defines a WINS server IP address for the
QuadroCS’ss LAN users.
View DHCP Leases leads to the page where the DHCP leased
LAN IP addresses are listed.
Fig. II-84: DHCP Settings page for LAN interface