Installation guide

QuadroCS Manual II: Administrator's Guide Administrator's Menus
QuadroCS (SW Version 3.1.x) 46
The Add Members page provides the following radio buttons:
IPaddress requires the member IP address that is to be added to
the group.
IP Subnet requires the subnet specified by the IP address and the
Maskbits. See above for more information about Maskbits.
The User-defined Group includes previously added groups that
also may be added as a member to another group.
Member description text fields can be used to enter an optional
description of the member.
Fig. II-79: IP Pool Group Configuration – Add Member
To Add a new Group with Members
1. Select the Manage IP Pool Groups link on the Filtering Rules page.
2. Click on the Add button on the IP Pool Configuration page. A page where a new group may be added will appear in the browser window.
3. Define a group name in the Group Name text field and fill in the Group Description, if needed.
4. To add a group with the given parameters press Save.
5. Open the IP Pool Group Configuration page by clicking on the group name.
6. Select the Add button on the IP Pool Group Configuration page. A page opens where new members may be added to the group.
7. Enter an IP address for the member in the IP Address text fields, select a IP subnet or IP group from the User defined Group drop down list
to assign it to the currently selected group.
8. Enter a Member Description in the corresponding text field, if needed.
9. To add a member with these parameters to the selected group press Save.
To Delete a Member
1. Select the Manage IP Pool Groups link. The IP Pool Configuration page appears with the table of groups (if any).
2. Click on the desired members that ought to be deleted. The IP Pool Group Configuration list appears.
3. Check one or more checkboxes of the corresponding members that ought to be deleted from the Members table. Press Select all if all
members ought to be deleted.
4. Press the Delete button on the IP Pool Group Configuration page.
5. Confirm the deletion with Yes or quit with No.
To Delete a Group
1. Select the Manage IP Pool Groups link. The IP Pool Configuration page appears with the table of groups (if any).
2. Check the one or more checkboxes of the corresponding groups that ought to be deleted from the groups table. Press Select all if all groups
ought to be deleted.
3. Press the Delete button on the IP Pool Configuration page.
4. Confirm the deletion with Yes or quit with No.