Installation guide

QuadroCS Manual II: Administrator's Guide Administrator's Menus
QuadroCS (SW Version 3.1.x) 33
Each column heading in the aforementioned tables is made as a
link. By clicking on the column heading, the tables will be sorted by
the selected column. Upon sorting (ascending or descending),
arrows will be displayed close to the column heading.
For both Conferences and Successful Calls pages, the statistics
summary and the search components are present.
The statistics summary contains the Number or (Call) Records
that displays the total number of conference entries or successful
calls in the corresponding tables. Additionally Conf Total
Duration, Conf Maximum Duration, Conf Average Duration and
Conf Minimum Duration columns provide information about the
total, maximum, average and minimum durations of the
conferences.
The following search components allow to filter all the tables on
this page:
The ConfID text field requires the ID of the conference call. Only
numeric values are allowed for this field.
The From and To text fields above the Activation Time column
are used to search conferences by its activation date and time.
This data must be entered in the following format: dd-mm-yyyy
hh:mm:ss. However, the time criteria are optional. From requires
an earlier date and time than the To date and time. If the entered
data does not meet this condition, the error message “Minimal
date should be less than maximal date” is displayed and statistics
filtering is aborted.
The From and To drop down lists above the Conference
Duration column are used to search by conference duration. The
duration has to be selected from the listed values. The From field
has to indicate a smaller value than the To field. If the inserted
data does not meet this condition, the error message “Minimal
duration should be less than maximal duration” prevents statistics
filtering.
Fig. II-60: Call Statistics page
The From and To text fields above the Participant Count column are used to search by the number of participants in the conference. You can
perform manual, trigger or scheduled searches of conferences by using the Activation Reason text field. Conferences can be searched by their
activation details by using the Activation Details text field. The value in the Activation Details column is dependent on the Activation Reason. For
Manual activation, details can be either Admin or Moderator indicating the initiator of the conference. For Trigger activation, details indicate the
callers' address. For Schedule activation, details indicate the conference activation date and time.
By using the Participant text field located in the Successful Calls table call participants can be searched by their SIP addresses (see chapter
Entering a SIP Addresses correctly). If the defined SIP address is inserted incorrectly, the error “Participant address is incorrect” will prevent filtering.
The From and To text fields above the Call Start Time column in the Successful Calls table are used to search incoming or outgoing calls by the
call start date and time. The data has to be entered in the following format: dd-mm-yyyy hh:mm:ss. The time criteria are optional. From requires an
earlier date and time than the To field. If the entered data does not meet this condition, the error message “Minimal date should be less than
maximal date” prevents statistics filtering.
The From and To drop down lists above the Call Duration column in the Successful Calls table are used to search by the call duration. The
duration has to be selected from the listed values. The From field has to indicate a shorter duration than the To field. If the inserted data does not
meet this condition, the error message “Minimal duration should be less than maximal duration” prevents statistics filtering.
In the Nonsuccessful Calls page, entries can be searched by the Conference ID, by the participant’s SIP address, the call start time and the call
details (this column indicates a reason of the call failure).
Filter performs a search procedure by the selected criteria. The search may be done with several criteria at once.
To Enable/Disable the Statistics
1. Enter the Statistics Settings page.
2. Select/deselect the Enable Call Reporting checkbox to enable/disable conference statistics recording.
3. If enabling the statistics, the maximum number of records to be stored in the statistics table should be selected from the corresponding drop
down list.
4. Press Save to apply the new configuration.
To Filter the Statistics
1. Enter the desired criteria fields.
2. Press the Filter button to search the call reports within the Statistics table.
Please Note: To return to the complete Statistics Table clear all search criteria and press Filter.
To Reset the Statistics
1. Press the Clear All Records button in the Statistics Settings page.
2. Confirm the deletion by clicking Yes. The conference statistics will be deleted. To abort the deletion and keep the statistics information, click
No.