Installation guide

QuadroCS Manual II: Administrator's Guide Administrator's Menus
QuadroCS (SW Version 3.1.x) 32
IP address requires the IP address that is placed behind
NAT within the local network.
Subnet Mask requires the subnet mask corresponding to
the specified IP address.
Fig. II-58: NAT Exclusion Table - Add Entry page
To Configure the NAT Exclusion Table
1. Press the Add button on the NAT Exclusion Table page. The Add Entry page will appear in the browser window.
2. Specify an IP Address and its Subnet Mask in the corresponding text fields.
3. Press Save on the Add Entry page to add the selected IP range to the NAT Exclusion Table list.
To Delete an IP Range from the NAT Exclusion Table
1. Select the checkboxes of the corresponding IP range(s) that should to be deleted from the NAT Exclusion Table. Press Select all if all IP
ranges should to be deleted.
2. Press the Delete button on the NAT Exclusion Table page.
3. Confirm the deletion by pressing Yes. The IP range will then be deleted. To abort the deletion and keep the IP range in the list, press No.
Statistics
The Statistics page consists of four pages with conference statistics on the first page, successful call statistics on the second page, nonsuccessful
call statistics on the third page and the statistics settings on the fourth page. The Statistics allows collecting conference call events on the QuadroCS
with their parameters and to search them by various criteria.
The Statistics Settings page contains the following components:
The Enable Call Reporting checkbox enables conference calls
statistics reporting.
The Maximal Number of Conference Call Records and Maximal
Number of Nonsuccessful Call Records drop down lists re used
to select the maximum number of successful and non-successful
statistics records to be collected and shown in the Statistics table.
If the record number exceeds the numbers specified in this drop
down list, the oldest record will be deleted automatically.
The Download Call Statistics link is used to download all
statistics in a file that can be viewed with the simple text editor.
Please Note: If you consider the statistics entries in the displayed
tables to be important, it is recommended to download the
statistics prior to Firmware Update which will clear all statistics on
the QuadroCS.
The Clear all Records button is used to clear all displayed
statistics.
Fig. II-59: Call Statistics Settings page
The Conferences page displays a table with detailed information (Activation Time, Conference Duration, Participants Count, Activation Reason and
Activation Details) about the established conferences and gives the possibility to view the component calls of a particular conference.
To do so, click on the corresponding conference ID. To view all calls directed to or dialed out of the QuadroCS, move to the Successful Calls page
where the call details table (Activation Time, Conference Duration, Participant, Call Start Time and Call Duration) is displayed. Failed calls can be
viewed in the Nonsuccessful Calls page.