Installation guide

QuadroCS Manual II: Administrator's Guide Administrator's Menus
QuadroCS (SW Version 3.1.x) 27
The Registration SIP Port text field indicates the Host Port number to connect to the SIP server. It only may consist of numerics, otherwise the
error message “SIP Server Port is incorrect” will be displayed when attempting to save the SIP Registration Settings. If no SIP server port is
specified, Quadro will access the SIP server through its default port 5060.
The Registration on SIP Server checkbox enables the SIP server registration option for the Auto Attendant.
3. SIP Advances Settings
This page requires Attendant advanced SIP settings and
has the following components:
SIP Outbound Proxy Address and SIP Outbound
Proxy Port text fields require the settings of the SIP
Outbound Proxy server which acts as a SIP server where
all the SIP requests and other SIP messages are
transferred. Some SIP servers use outbound proxy
server to escape restrictions of NAT. e.g. Free World
Dialup service uses Outbound Proxy server. If an
Outbound proxy is specified here, all SIP calls originated
from the Conference Server’s Auto Attendant are made
through that outbound proxy, i.e. all requests are sent to
that outbound proxy.
The Authentication User Name text field requires an
identification parameter to reach the SIP server. It should
be provided by the SIP service provider and can be
requested for some SIP servers only, for others field
should be left empty.
Fig. II-47: Conference Attendant – SIP Advanced Settings
To Create a Conference
1. Press the Add button on the Conferences page. The Conference Wizard appears in the browser window.
2. Choose Conference from the Type drop down list.
3. Press Next to move forward to the second page of the Conference Wizard.
4. Enter the desired conference number in the Conference ID text field.
5. Define the conference Subject and Description in the corresponding text fields if needed.
6. Define the Moderator and Participant Passwords and confirm them.
7. Define the conference Max. Duration in the corresponding text field.
8. Choose a Percentage of System Memory for the corresponding conference recordings.
9. Enable Routing Mode, if needed.
10. Toggle Leave Active checkbox for the conference to remain active even when all participants have left.
11. Press Next to move to the conference SIP Registration Settings page.
12. Provide the Registration Username in the same named text field.
13. Provide the Registration Password and confirm it in the corresponding text fields.
14. Define the Registration SIP Server and Registration SIP Port in the corresponding text fields.
15. Enable Registration on SIP Server, if needed.
16. Press Finish to create a conference with the defined settings.
To Create an Attendant
1. Press the Add button on the Conferences page. The Conference Wizard appears in the browser window.
2. Choose Attendant from the Type drop down list.
3. Press Next to move forward to the second page of the Conference Wizard.
4. Define the attendant Description in the corresponding text field if needed.
5. Choose a Percentage of System Memory for the attendant scenario and custom voice prompts.
6. Press Next to move to the conference SIP Registration Settings page.
7. Provide the Registration Username in the same named text field.
8. Provide the Registration Password and confirm it in the corresponding text fields.
9. Define the Registration SIP Server and Registration SIP Port in the corresponding text fields.
10. Enable Registration on SIP Server, if needed.
11. Press Finish to create an attendant with the defined settings.
Conference Codecs
To establish IP voice communication, both parties have to use the same codec. During setup of the communication line, the codec is negotiated. If
the caller does not find a matching codec, the communication won’t start. If you want to be reachable by all IP callers, it is helpful to support as many
codecs as possible. In this case, all codecs that Quadro supports should be added to the Active Codecs' table. On the other hand, some codecs
require significant bandwidth- up to 64 kBit/s. If you definitely don't want to use these codecs, you must remove them from the Active Codecs' table.