Installation guide

QuadroCS Manual II: Administrator's Guide Administrator's Menus
QuadroCS (SW Version 3.1.x) 13
Memory Status
The Memory Status page provides information about the
total, free and used memory on the Quadro. The Memory
Size field indicates the total available space on the Quadro,
expressed in the bytes, kilobytes and megabytes.
The Memory Status table displays the space used by each
conference. It shows the free and total space (counted in
bytes, kilobytes and megabytes) for every conference. This
table includes the following information:
• Conference ID - the column lists all available
conferences on the QuadroCS. Clicking on the
conference ID, the Conference Recording Settings
page will be opened when the overall memory size
allocated to that particular conference may be altered.
• Used Space - the column shows used by the
conference.
• Percentage of System Memory - the column displays
the space allocated to the conference.
• Free Space - shows the free space referring to the
corresponding conference.
• Total Space - shows the overall space allocated to the
conference. This is a summary of already used and still
free spaces.
Call Statistics shows the current number of calls within the
recorded statistic entries.
Fig.0-14 Memory Status page
Hardware Status
The Hardware Status table displays a list of the hardware
devices present and currently available on the QuadroCS
board. The hardware device version number and additional
comments about its state are indicated here.
Fig. II-15: Hardware Status page
SIP Registration Status
The SIP registration Status is a table displaying the SIP
registration status of the QuadroCS conferences.
The table contains a list of all the registered conferences of
Quadro, SIP registration name for each conference, addresses
of SIP servers where they are registered (if applicable), whether
or not it is registered for each conference, and the registration
date and time. By clicking on the row heading, the table will be
sorted by the selected column. When sorting (ascending or
descending), arrows will be displayed next to the column
heading.
The links inside the table will link you to the SIP Registration
Settings page of the corresponding conference where the SIP
registration settings may be altered.
The Detected Connection Type field displays the connection
type Quadro currently is acting in (direct connection or behind
NAT). If Quadro is acting behind NAT, the NAT machine IP
address is also displayed.
Fig. II-16: SIP Registration Status page