Installation guide

QuadroCS Manual II: Administrator's Guide Administrator's Menus
QuadroCS (SW Version 3.1.x) 12
The area Receive Values provides the following:
• Receive Bytes - number of received bytes.
• Receive Packets - number of received Ethernet
packets.
• Receive Errors - number of received packets
containing errors.
• Receive Drop Errors - number of received packets
that have been discarded.
• Receive Overrun Errors - number of received overrun
errors that occur when the receive buffer is not large
enough to hold all incoming packets. This error usually
appears due to a slow receiving system.
• Receive MultiCast Packets - number of received
broadcast packets.
The area Transmit Values provides the following:
• Transmit Bytes - number of transmitted bytes
• Transmit Packets - number of transmitted Ethernet
packets.
• Transmit Errors - number of transmitted packets
containing errors.
• Transmit Drop Errors - number of transmitted packets
that have been discarded.
• Transmit Carrier Errors - number of transmit carrier
errors that occur due to a defective or lost connection
on the Ethernet link.
• Transmit Collisions - number of transfer errors that
occurred during a simultaneous packet transmission
from both sides.
Fig. II-13: Transfer Statistics Diagram Chart
To see the Transfer Statistics Diagram Charts, select the desired criteria and click Save to generate the corresponding chart and the table
showing the transfer statistics values (if enabled). The letters M (millions) and K (thousands) used in the legend of the displayed diagrams show the
total number of specified criteria. The Reset Statistics button is used to reset the chart and the table (if enabled).