Installation guide

Quadro Manual I: Installation Guide Requirements
Requirements
• One 120/240 VAC power outlet in close proximity to the Quadro.
• One RJ-45 Ethernet 10/100 broadband Internet connection.
• One CAT 5 Ethernet cable with an RJ-45 connector to connect to the Quadro LAN
port
• One PC with a 10Mbps or a 10/100 Mbit/s Ethernet card or adapter installed.
• et Explorer 5.5 or higher, or Netscape Navigator 4.7 or
higher are recommended.
the QuadroCS is to be connected to a hub or switch, a crossover cable may
e required.
• TCP/IP network protocol installed on each PC.
For optimal results, Intern
Please Note: The QuadroCS is shipped with one straight RJ-45 CAT 5 cable. If the LAN
connector of
b
QuadroCS (SW Version 3.1.x) 5