Installation guide

Quadro Manual I: Installation Guide Step 4: Registering a Conference on Epygi's SIP Server
Fig. I-26: SIP Services Add New Extension page
The Authentication password is used to validate the entry and must match the password
entered on the Quadro at a later time. Make sure to record the name, Authentication Pass-
word and SIP extension number so you can enter them into the Quadro later.
Save will store the entered information and conclude the basic SIP registration. The follow-
ing page will be displayed:
Fig. I-27: SIP Services; Your Extension page
This table shows unreg. in the Stat. column. This entry will change to reg. as soon as the
needed settings for the conference in the QuadroCS are complete and the conference suc-
cessfully registers on the SIP Server.
Now that the SIP server knows about the conference, the conference may be set up in the
QuadroCS. Once they are entered in the QuadroCS, they will be registered and can then
be used.
QuadroCS (SW Version 3.1.x) 28